AIRFIELD LIGHTING CABLE
- FAA L824 Cable
- 400Hz Cable
- RG7H1R Cable
- RHV and RHZ1 Cable
- FL2XCY and FLYCY Cable
- C33-224 / C33-225 Cable
VERI Cables specializes in designing and supplying a wide range of airport lighting cables for safety and system stability at airports, including runway lighting system cables for aircraft during takeoff and landing, large space transmission and equipment distribution cables, and wires for airport construction. These cable models have passed strict resistance and quality tests so you can choose confidently. This page will introduce you to the hot models of airport lighting cables, and with complete technical information you can contact us anytime.
FAA L-824 Airfield Ground Lighting Cable (AGL)
Cables of type FAA-L824 are generally categorized as type A, ب, and C, structurally ambient with and without metal shielding, all with XLPE insulation, generally single conductor low voltage power cables, with a universal rated voltage of 600V, 2كيلو فولت, or 5kV depending on the application scenario. The maximum operating temperature is +90°C. The size of these lighting cables manufactured by VERI Cables is strictly controlled and determined by the material and the specific application. The maximum operating temperature is +90°C. VERI Cables produces these lighting cables in tightly controlled sizes, determined by the material, the construction layer, and the specific application. For additional support with cable selection, please contact our team.
CONDUCTORS: Stranded soft drawn bare copper conductor per ASTM B-3 & B-8.
المعايير: ETL Certified, ICEA S-96-659, NEMA WC71
طلب: Airport Lighting Cables are suitable for FAA Type L-824 C and Airport Type L-824 underground lighting circuits and are typically installed in conduits, القنوات, and overhead lines, and are also well suited for direct underground burial. It can also be used in non-UL applications and can withstand voltages up to 5000 فولت.
كابلات فيري’ factory technical engineering team has extensive experience in the design, صناعة, and supply of airport lighting cables, having been involved in the infrastructure of several airport projects in China and abroad. We also provide relevant transmission cable accessories to guide AGL installations and create perfectly smooth transmission lines to ensure the highest level of safety. Please لا تتردد في الاتصال بنا about your project and specific cable requirements.
RG7H1R Lighting Cable
RG7H1R cables also belong to the category of PVC-insulated, rubber-sheathed cables suitable for airport lighting equipment supplying power to runway, taxiway, and apron lights, as well as navigational and obstacle aids. هذه الكابلات, manufactured by VERI in compliance with the CPR standard, are also widely used in European fixed cabling that is either run or terminated within a structure.
موصل: red copper, rigid, فصل 2.
Inner sheath: semi-conducting material.
العزل: HEPR has G7 quality.
Outer layer: semi-conducting layer, special high module HEPR.
Shield: red copper wire.
Outer sheath: PVC material of RZ/ST2 quality.
لون: أحمر.
STANDARD: CEI 20-13, اللجنة الانتخابية المستقلة 60502, CEI 20-16, CEI EN 60332-1-2 (اللجنة الانتخابية المستقلة 60840 ل 26/45 كيلو فولت).
طلب: This cable is suitable for the transportation of energy between substations and large users. There is no problem if it is left for free-hanging or installed in a pipe or channel. Laying underground is not recommended.
RG7H1R cables are generally single-core, with a conductor cross-section of 16mm, other sizes are available on request. It is a distribution cable with a rated voltage of 3.6/6kV and complies with the regulations for airport transmission installations. If your project is unique or requires materials for specific environments, please feel free to contact our factory team to discuss.
FL2XCY&FLYCY Lighting Cable
FL2XCY and FL2XCYRY with PVC and XLPE insulation are used in medium voltage power lighting systems for primary and secondary series circuits in airport lighting, with rated voltages ranging from 2Kv to 10kV, with conductors made of copper and shielded with copper tape. We promise that this type of cable manufactured by VERI Cables is robustly flame retardant, مقاومة للنفط, and UV resistant. These cables are also highly impact and weather resistant considering the environment in which this type of airfield cable is installed.
Maximum Conductor Temperature: 90درجه مئوية
Short Circuit Temperature: 250درجه مئوية
Operating Temperatures: -40℃~+90℃
الحد الأدنى لنصف قطر الانحناء: 15×OD
Flame Retardant: Yes
Oil Resistant: Yes
FL2XCY and FLYCY single core airport cables are usually standard with relatively small copper conductors from 6mm size upwards and are often used for critical cabling of airport lighting equipment, as well as for connecting series circuits between constant current regulators and isolation transformers, and series circuits between isolation transformers. If you need a larger size or alternative voltage, be sure to contact us. See our FAA L-824 certified cable series for other models.
خدماتنا المهنية
شهادة الجودة
تتوافق المنتجات المصنعة بواسطة VERI Cables مع المعايير الدولية مثل GB, اللجنة الانتخابية المستقلة, بكالوريوس, نفك, أستم, من, إلخ. علاوة على ذلك, يمكن لفريقنا الفني تقديم خدمات تخصيص الكابلات لتلبية احتياجاتك.
تتبع العملاء
توفر VERI خدمات استشارية مجانية للكابلات الاحترافية, خدمات حل المشروع وقفة واحدة, وحلول تسليم المنتجات السريعة.
النقل المهني
كابلات فيري’ الهدف الأولي هو ضمان التسليم السريع والآمن للمنتجات مع توفير أفضل حلول التعبئة والتغليف والنقل لتقليل عدد العملاء’ تكاليف النقل بشكل كبير.
تغليف الكابلات
يتم توفير تغليف كابل VERI في بكرات خشبية, صناديق مموجة, والملفات. يتم إغلاق الأطراف بشريط BOPP ذاتي اللصق وأغطية إغلاق غير استرطابية لحماية أطراف الكابل من الرطوبة.. يمكننا طباعة الشعار المطلوب على الجزء الخارجي من البراميل بمادة مقاومة للماء حسب متطلبات العميل.
