ترجمة


+86-371-67829333

أخبار

لماذا تفشل خطوط كابلات الألياف الضوئية؟?

fiber cable

Optical cable is a certain number of optical fibers form a cable core according to a certain method. Optical fiber cable is covered with a sheath, and some are also covered with an outer sheath to realize optical signal transmission.

The integrated wiring project is a relatively complex project, so it is impossible to ensure zero errors and zero faults in the construction of the project. لكن, it is relatively easy to minimize the faults and mistakes of the integrated wiring project. There are four major reasons for the failure of communication الألياف الضوئية cable lines.

Lightning Strike
The armored components of the optical cable are all metal conductors. If the power line is short-circuited or the lightning strikes the metal parts, a strong current will be generated to destroy the optical cable line equipment, and even serious casualties may occur.

Poor Insulation of Optical Cables
The basic structure of optical cable is generally composed of cable core, reinforcing steel wire, filler and sheath, إلخ. Besides, there are waterproof layer, buffer layer, insulated metal wire and other components as needed.

If the communication optical cable line is not insulated well, the operating strength will be greatly reduced. Due to stress corrosion and static fatigue after the splice box enters the water or is wet, and the optical cable will break in severe cases.

Fault at the Line Connector
Faults are most likely to occur at the line joints. Because the optical fibers no longer have the protection power to the original optical cable structure at the joints. So the daily operation and protection work can only be carried out by relying on the joint box. The probability of failure is greatly increased.

External Influence
Line faults are often caused from external forces. Since many communication optical cable lines are laid in the field, so the optical cable line could avoid effectively because of the damage of many external factors.

Here at Veri كابل, you can get more information about cable products. Hope this was useful.

ZMS Cable F

Recent Posts

What is the Difference Between H05RR-F & H05RN-F & H07RN-F in the Rubber Cable?

When choosing the right rubber cable for an electrical engineering project, it is critical to

19 hours ago

سنة صينية جديدة سعيدة! —— كابل ZMS

عزيزي الشركاء والعملاء: 29 يناير, 2025 هل السنة القمرية الصينية الجديدة – Spring

2 months ago

ما هو الفرق بين الأسلاك النحاسية العارية وسلك النحاس المملح?

الأسلاك النحاسية مكون أساسي في عالم الهندسة الكهربائية والإلكترونيات, valued

2 months ago

بيان رسمي & إعلان —— ZMS Cable

إعلان لجميع العملاء والشركاء, حديثاً, there has been sufficient evidence that other

2 months ago

2025 سنة جديدة سعيدة!

بمناسبة العام الجديد 2025, ZMS Cable wishes every customer and partner a

3 months ago

Strong Demand Trend for Medical Fiber Optics Market in Europe

The European medical industry has witnessed significant advancements in recent years, driven by the integration

4 months ago