Self Regulating Heating Cable
VERI Heating cables are made for a wide variety of industrial, commercial and residential applications.
VERI Self-Regulating Heating Cable Types
Self-Regulating Heat Cable with Aluminum Magnesium Insulation
The self-controlling electric heating belt is composed of a conductive core belt with “PTC” characteristics and an insulating sheath covered, which can automatically adjust the output power and the temperature of the heat mixing with the temperature change of the heating object; it can also be arbitrarily shortened or It can be extended and used within a certain range, and has the advantages of good insulation performance, anti-aging performance, low-voltage operation, safety and reliability, good flexibility, easy installation, and convenient use and maintenance.
- Technical parameters Construction temperature: minimum -40 ℃.
- Structural diagram of self-controlling electric heating belt Thermal stability: 1000 times of on and off for 22 consecutive days, the heating value of the hot wire is maintained above 90%.
- Bending radius: 12.7mm at room temperature at 20°C, and 35.0mm at low temperature at -30°C.
- Insulation resistance: When the ambient temperature is 75°C, shake the meter with 2500VDC for 1 minute. The minimum insulation resistance (between the wire and the shield) is 100MQ.
- Working voltage: 12V, 24V, 36V, 110V, 220V Output power at 10°C: 10, 15, 25, 35, 45W/m.
Materiale cunduttore | Tinned copper wire |
Insulation Material | PF |
Number of Conductors | 19*0.32, Twin Conductor |
Application
Flame Retardant Explosion-Proof Type Self-Regulating Heating Cable
VERI manufactures self-regulating cables that provide safe and reliable heat tracing performance for freeze protection of pipes, valves, tanks, and similar applications.
Advantage:
- Safe, no need thermostat
- Energy efficient
- Easy to install, cut to length on the job site
- Can be overlapped
- Automatically temperature control ed
- Eco-friendly, no emissions
Materiale cunduttore | tinned copper |
Insulation Material | Thermoplastic |
Number of Conductors | 2 |
Color | red,black or flexible color |
Tensione | 110-170v, 220v |
Application
Piping, plumbing, safety showers, sprinkler systems, freeze protection, viscosity control, low to high-temperature maintenance, general locations, hazardous locations, heat tracing applications, warming, tank heating, drain de-icing, and driveway snow melting, and hot water systems.
High Temperature Self-Regulation Heating Cable for Pipe
This self-regulating heating cable adjusts the output power according to the ambient temperature. Quandu a temperatura aumenta, the resistance increases and the output power decreases. Conversely, when the temperature decreases, the resistance decreases and the cable generates more heat. Even when overlapped, the cables will not overheat or burn out.
ADVANTAGES
1. Energy fficient&Safety Assure
2. Easy to install, can be cut to any length (up to max circuit length)
3. No overheating or burnout.
4. Suitable for non-hazardous, hazardous, and corrosive environments.
5. Provide Complete accessories.
Type | Power (W/M, at 10℃) | Maximum Tolerance Temperature | Maximum Maintain Temperature | Minimum Installation Temperature | Maximum Usage Length (based on 110/220V) |
Low Temperature | 10W/M 15W/M 25W/M 35W/M | 105℃ | 65℃±5℃ | -40℃ | 50/100m |
Medium Temperature | 35W/M 45W/M 50W/M 60W/M | 135℃ | 105℃±5℃ | -40℃ | 50/100m |
High Temperature | 35W/M 50W/M 60W/M | 205℃ | 120℃±5℃ | -30℃ | 50/100m |
VERI CABLE SERVICE
Veri Cable has multiple ways to protect your cables, cun imballaggio di spedizione robusta è prufessiunale è assicurazione cumpleta. Prima di spedizione, i nostri cavi sò imballati in bobine di legnu è bobine di scatula ondulata. Durante u trasportu, per prutege l'estremità di u cable da l'umidità, li sigillamu cù cinta autoadesiva BOPP è non-hygroscopic.
Se ci sò prublemi di qualità, cum'è l'imballaggio dannighjatu è i danni di a superficia di u produttu in u locu quandu i merchenzie sò ricevuti, se i beni sò cunfirmati per esse veru, i beni ùn currispondenu à l'ordine, è i prublemi di qualità truvati da u cliente durante a stallazione, u prucessu di posa è usu sò cunfirmati per esse i prublemi di qualità di u pruduttu stessu, Se a consegna ùn hè micca in cunfurmità cù i requisiti di u cuntrattu, per piacè cuntattate a nostra cumpagnia direttamente.