כבל רכבת
Railroad cables are primarily a comprehensive range of cables. As railroads adapt to the needs of the traveling public in the construction and transmission of power, VERI Cables designs and manufactures special cables for railroads made from the latest materials with the latest standards of chemical and mechanical resistance, fire resistance, and EMC performance, which can greatly enhance the transmission capacity of the cables. In addition to specific models, we offer low and medium voltage power cables for railroad construction, fiber optic cables for communication, and control and signaling cables, including a full range of products from central and distributed architecture to CBTC, ETCS, and interlocking technology. Please feel free to contact us for any of your cable technical specifications and dimensions.
Railroad Electric Power Cable
Commonly used railroad power cables include armored or unarmored cables to BS6724, BS6622, low smoke halogen free cables, 25kV feeder cables, וכו. נְתוּנִים, as a professional cable supplier, can provide railroad power cables that fully comply with Network Rail standards.
Used on potentially risky fire-prone transmission lines to significantly reduce the emission of life-threatening toxic fumes, but is limited to signal power distribution and is not applicable for general signaling purposes.
Suitable for use in conventional power networks, in line with the laying of underground cable ducts, or can be directly buried in the ground.
For fixed installations in conduits and protected equipment, where fire, smoke emissions, and toxic fumes pose a potential hazard to life and equipment.
For distribution of conventional heating systems. These heavy-duty cables protect against abrasion and
mechanical shocks when working with equipment, while remaining flexible and easy to install.
The cable operates at a maximum network voltage of 110 kV and is suitable for use in locations where mechanical protection is otherwise provided, under the latest IEC standards. This range of cables can be customized to meet specific project requirements.
Power cables for power networks, underground and cable ducts.
Before you receive your goods, we will provide you with various qualifications and test reports to ensure that the cables supplied have undergone rigorous quality testing and meet the specific operational and safety requirements of the railroad construction industry.
Railway Overhead Line Wires
Railroad overhead cables refer to a network of wires and cables suspended above the track to supply power to the train while it runs on the track. The overhead cables used are typically 25kV alternating current (AC) compliant and are widely used on mainline and high speed rail networks. VERI cable also offers a full range of Network Rail approved overhead line conductor accessories to assist with quick and easy installation. VERI cables has been certified by many of our customers as a state-of-the-art cable supplier, so trust us for price and quality. VERI Cables has been recognized as a state-of-the-art cable supplier by many of the customers we have worked with, so trust us to provide you with the price and quality you deserve.
VERI Cables produce overhead bare copper conductors for conventional overhead power transmission, but are also very suitable for remote transmission of power in railroad infrastructure projects, available in bronze II (PADS: 91/012330) or hard drawn copper (PADS 91/010269).
The overhead stranded copper conductor consists of 19 individual wires, each with a diameter of 3.20 mm and a nominal cross-sectional area of 150 מ"מ. Bronze II stranded conductors consist of 19 wires, 2 of which are bronze, and the other wires are made of copper-magnesium. Each wire has a diameter of 2.1 mm and a nominal cross-sectional area of 70 מ"מ.
This AAC conductor is mainly used for short-range transmission and distribution in railroad systems and is rated for low, בֵּינוֹנִי, and high voltages up to 60 kV. The cable is very corrosion-resistant and can withstand harsh weather, and if you need to increase your safety you can opt for a conductor with PVC insulation.VERI Cables recommends that you feel free to contact us at any time so that we can meet your various needs.
The contact line, as a hot seller in railroad construction, transmits electricity from the railroad overhead line system to the locomotive using a drip line suspended from the contact grid line, and in direct contact with the pantograph. The cross-sectional area of the conductor is 107mm, 120מ"מ, וְכֵן הָלְאָה.
We also offer Network Rail compliant accessories such as suspension insulators, cable glands and more to complement our overhead line conductors.
Railroad Signal Cables
Signal transmission is very important in rail operation and VERI Cables manufactures specialized signal cables for railroad systems to ensure signal transmission and continuous power supply for all equipment applications on a single track. These cables are used for control and signaling and keep the rail network and its passengers and goods moving safely.
Our cables are rigorously certified by Network Rail for a wide range of flower-specific applications and are available in single-core, twin-core, and multi-core versions.
דירוג מתח Uo/U: 6.5/1.1kV
דירוג טמפרטורה: -25°C to +85°C
מְנַצֵחַ: מַחלָקָה 2 stranded tinned conductor
בִּדוּד: LSZH (עשן נמוך אפס הלוגן) or EPR (Ethylene Propylene Rubber) composite
Separator: PET (Polyethylene Terephthalate)
נְדָן: LSZH (עשן נמוך אפס הלוגן
| NR/PS/SIG/00005 Type A1, A2, A3 & A4 | NR/PS/SIG/00005 Signalling Type B1 & B2 |
| Nr/PS/SIG/00005 Signalling Type C1, C2 & C3 | NR/PS/SIG/00005 Signalling Type D1 & D2 cable |
| NR/PS/SIG/00005 Signalling Type E1, E2 & E3 Cable | Westpac CoPolymer Signalling Cable |
As you understand, each model of railroad signal cable is different in terms of construction and application, if you need a differently constructed signal cable for a specific application, please feel free to contact our team and we will provide customized services promptly.
השירותים המקצועיים שלנו
אישור איכות
המוצרים המיוצרים על ידי VERI Cables עומדים בתקנים בינלאומיים כגון GB, חברת החשמל, BS, NFC, ASTM, מִן, וכו. יֶתֶר עַל כֵּן, הצוות הטכני שלנו יכול לספק שירותי התאמה אישית של כבלים לצרכים שלך.
מעקב אחר לקוחות
VERI מספקת שירותי ייעוץ כבלים מקצועיים בחינם, שירותי פתרון פרויקטים חד-פעמיים, ופתרונות משלוח מוצרים מהירים.
הובלה מקצועית
כבלי VERI’ המטרה הראשונית היא להבטיח אספקה מהירה ובטוחה של מוצרים תוך מתן פתרונות האריזה וההובלה הטובים ביותר לצמצום הלקוחות’ עלויות הובלה רבות.
אריזת כבלים
אריזת כבלים של VERI מסופקת בסלילי עץ, קופסאות גליות, וסלילים. הקצוות אטומים עם סרט דביק BOPP ומכסי איטום לא היגרוסקופיים להגנה על קצוות הכבל מפני לחות. אנו יכולים להדפיס את הלוגו הנדרש על החלק החיצוני של התופים עם חומר עמיד למים לפי דרישת הלקוח.
