Traduzione


+86-371-67829333

Notizia

Optical Fiber Communication in Power Communication

With the increasing development of the power industry, the capacity and reliability of the power communication network need to be continuously expanded and enhanced.

Attualmente, power special optical fibers used in power communication include fibra ottica composite ground wire, optical fiber composite phase wire, all-dielectric self-supporting optical fiber cable, metal self-supporting optical fiber cable, and ground bundled optical fiber cable. The article discusses the first three main applications.

Application of Optical Fiber Ground Wire


OPGW can provide optical fiber units for communication in the ground wire of power transmission lines. It is more commonly used in new lines or old lines to replace ground wires. Then the optical cable can be used as a lightning protection wire for a transmission line, providing shielding protection for the transmission wire against lightning discharge. And can also use the optical fiber compounded in the ground wire to transmit information. In the application process, OPGW can not only meet the optical performance but also fully meet the mechanical and electrical performance requirements of the overhead ground wire.

Application of All-Dielectric Self-Supporting Optical Cable

ADSS is widely used in transmission lines with voltage levels of 220KV, 110KV, and 35KV, and the existing lines are the most widely used. ADSS optical cable has excellent optical fiber transmission, optical cable mechanical and environmental performance. And can be erected in the same way as alta tensione power transmission lines. ADSS has strong advantages: strong anti-magnetic interference, and strong anti-electric corrosion ability. And the design of optical cable has fully considered the influence of various natural conditions, multiple bending, not easy to burn, not easy to generate heat aging problem.

Application of Optical Fiber Composite Phase Line ( OPPC )

In order to meet the requirements of optical fiber networking, OPPC was formed by adding optical fibers to the traditional phase line structure by adopting suitable methods. Although OPPC and OPGW have the same structure, they are different in principle in terms of installation and operation. OPPC can make full use of the line resources in the power system. As a new type of special power optical cable, it can effectively alleviate the external contradictions such as frequency resources, e compatibilità elettromagnetica, and can be well used in power communication.

Hope this article was helpful for you.

ZMS Cable F

Recent Posts

Forte andamento della domanda per il mercato delle fibre ottiche medicali in Europa

L’industria medica europea ha assistito a progressi significativi negli ultimi anni, driven by the integration

3 weeks ago

Quali cavi industriali vengono utilizzati nel lancio di un razzo dall'inizio alla fine?

Il successo del lancio di un razzo comporta una delle imprese ingegneristiche più complesse che si possano immaginare,…

1 month ago

Quali materiali in fibra ottica vengono utilizzati per produrre un cavo in fibra ottica?

I cavi in ​​fibra ottica sono diventati la spina dorsale delle moderne telecomunicazioni, offering high-speed data transmission over

1 month ago

Quanti nuclei sono normalmente i cavi in ​​rame ad alta tensione? Quali sono le applicazioni?

I cavi in ​​rame ad alta tensione sono componenti essenziali nella distribuzione e trasmissione dell'energia elettrica,…

2 months ago

What Are the High Voltage Lines Used in the Railroad System?

Railroad high voltage lines play a vital role in powering the railway systems that transport

3 months ago

What is the Difference Between Single-Mode and Multimode Fiber Optic Cables?

Fiber optic cables are critical components in modern communication networks, enabling high-speed data transmission over

3 months ago