High voltage cables are available in overhead and underground laying methods.
L'editoriale del cavo ZMS ha organizzato in modo completo la classificazione dei cavi e la rappresentazione dei nomi, ma ha anche fatto un'introduzione dettagliata alla classificazione dei cavi, per aiutarti a comprendere meglio l'acquisto del cavo.
Il focus di questo articolo è costituito dai tre moduli seguenti.
1 Un'introduzione generale alle regole di denominazione e classificazione dei cavi.
2 Communication cable naming methods and combined with specific examples.
3 Commonly used communication cables and power cables in design.
The distinction between wires and cables has no strict boundaries.
Generalmente, products with few cores, small product diameters, and simple structures are called wires, those without insulation are called bare wires, and others are called cables.
Conductor cross-sectional area greater than 6 square millimeters) known as large wires, less than or equal to 6 square millimeters known as small wires, insulated wire is also known as cloth wire.
Cable products are mainly divided into the following categories:
The main feature of this product is pure conductor metal, with no insulation and sheath layer, ad esempio steel-core aluminum stranded wire, copper and aluminum convergence, electric locomotive wire, eccetera.
The processing technology is mainly pressure processing, such as melting, calendaring, drawing, stranding tight pressure stranding, eccetera. The products are mainly used in suburban, rural, customer main lines, switchgear, eccetera.
The main feature of this product is extruded (winding) insulation layer outside the conductor, such as overhead insulated cables, or several cores stranded (corresponding to the phase, zero, and ground lines of the power system).
Such as more than two cores of overhead insulated cable, or then add a sheath layer, such as plastic or rubber cable. The main process technologies are drawing, incaglio, insulation extrusion (wrapping), cable formation, armoring, sheathing extrusion, eccetera. The different process combinations of various products are somewhat different.
The products are mainly used in the transmission of strong electrical energy in the power generation, distribuzione, trasmissione, transformation, and power supply lines, through the current (tens of amps to thousands of amps), high voltage (220V to 500kV and above).
The main features of this category are: a wide range of specifications, a wide range of applications, the use of voltage in 1kV and below more, in the face of special occasions continue to derive new products.
Such as fire-resistant cables, flame retardant cables, cavi a bassa emissione di fumi e senza alogeni, termite-proof, rat-proof cables, oil-resistant or cold-resistant, resistente alla temperatura, wear-resistant cables, medical, agricultural, mining cables, thin-walled wires, eccetera.
With the rapid development of the communication industry in the past two decades, the products have also had an amazing development rate.
In the past simple telephone and telegraph cables developed into thousands of pairs of words cable, Cavo coassiale, cavo in fibra ottica, cavo dati, and even combined communications cable.
This type of product structure size is usually small and uniform, with high manufacturing precision requirements.
Mainly used for various motors, strumenti, metri, eccetera.
All the above six categories of cables can consult ZMS cable suppliers for purchase.
The complete naming of cables is usually complicated, so people sometimes use a simple name, usually the name of a category combined with the type specification, to replace the complete name.
Per esempio, “low-voltage cable” stands for all plastic insulated power cables of 0.6/1kV class.
The cable product name mainly includes the following elements:
(1) Product application or size class name
(2) Product structure material or type
(3) Important features or additional features of the product
Named in the above order, sometimes to emphasize the important or additional features, the features are written in front or before the corresponding structure description.
The overall principle of product structure description is following the principle of inside to outside: conductor → insulation → inner sheath → outer sheath → armor type.
The type composition and order of power cables are as follows:
Category – conductor – insulation – inner sheath – structural characteristics – outer sheath or derivative – make manganese wine container
Which 1-5 items and item 7 with the phonetic alphabet, polymer materials with the first letter of the English name, each item can be 1–2 letters; item 6 is 1–3 numbers.
ZR (ritardante di fiamma), NH (fire-resistant), DDZ (low smoke and low halogen), WDZ (low smoke and halogen-free), K (control cable category), DJ (electronic computer), N (agricultural direct burial), JK (overhead cable category), B (cloth wire), TH (for hot and humid areas), FY- (termite-proof, corporate standards), eccetera.
T (conduttore di rame), L (aluminum conductor), G (steel core), R (copper flexible wire).
V (polyvinyl chloride), YJ (polietilene reticolato), Y (polietilene), X (natural butadiene rubber mixture insulation), G (silicone rubber mixture insulation), YY (ethylene-vinyl acetate rubber mixture insulation).
V (polyvinyl chloride sheath), Y (polyethylene sheath), F (neoprene mixture sheath).
P (copper mesh shield), P1 (copper wire winding), P2 (copper tape shield), and P3 (aluminum-plastic composite tape shield).
With the introduction of the above symbols, is it clear to see the various cable products again.
Copper is the main conductor material used in cable products, so the copper core code T is omitted, except for bare wire and bare conductor products.
Bare wire and bare conductor products, cavi di alimentazione, and electromagnetic wire products do not indicate the major class code, electrical equipment and communication cables are not listed, but the small class or series code.
Articolo 7 is a variety of special occasions or additional special use requirements of the mark, in the “-” after the phonetic alphabet mark.
Sometimes to highlight the item, the item is written to the forefront.
Such as ZR- (ritardante di fiamma), NH- (fire-resistant), and WDZ- (low smoke halogen-free, enterprise standards).
The metal conductor with better conductivity is silver, followed by copper and aluminum.
Due to the high price of silver, in addition to the use of silver on special occasions and special purposes, a variety of cables commonly used conductors are copper core wire or aluminum core wire.
Copper is a good conductor of electricity, with conductive properties second only to silver.
And copper mechanical strength is high and easy to calendaring. Draw and welding, and other processing. With good physical and mechanical properties and excellent process performance.
Because of the situation that copper and aluminum resources tend to decrease, copper is about the early depletion of mineral resources on earth.
From the perspective of scientific development, aluminum instead of copper is the inevitable development trend.
In terms of cable conductors, due to the lower strength of aluminum, pulling a thin line is more difficult. The current processing of soft conductors and ultra-soft conductors is not realistic.
But the cross-sectional area of more than 4mm2 cable can be completely assured that the use of aluminum conductors, the force to promote the aluminum instead of copper.
Both to ensure the transmission function, but also to reduce input costs, in line with the strategy of sustainable development.
(1) Need to ensure reliable connection in the long-term operation of the circuit. Such as important power supply, and important operating circuits. And secondary circuits, the excitation of the motor, mobile equipment lines, and the lines of severe vibration occasions.
(2) Explosion hazard or fire hazard circuits.
(3) Serious corrosion of aluminum and minor corrosion of copper.
(4) Particularly important public buildings, command center places of the military, and important office buildings of the party and government. And subway stations.
(5) The place next to high-temperature equipment.
(6) With emergency systems and fire-fighting systems-related occasions.
(7) Fire-resistant cables.
(8) The working current is larger, they need to increase the number of cable occasions.
Inoltre, in high-rise buildings, large and medium-sized computer room buildings. And important public buildings. To adapt to foreign requirements of domestic and foreign-funded projects and other projects should give priority to copper core conductors.
The above is a comprehensive introduction to some of the cables. If you have any questions about the purchase of cables or cable basics, welcome to consult us, we will have the most professional cable sales representatives to solve your questions.
Fiber optic cables have become the backbone of modern telecommunications, offering high-speed data transmission over…
High voltage copper cables are essential components in the distribution and transmission of electrical power,…
Railroad high voltage lines play a vital role in powering the railway systems that transport…
Fiber optic cables are critical components in modern communication networks, enabling high-speed data transmission over…
Control cables are essential components in industrial applications, facilitando la comunicazione, signal transmission, and control between…
I cavi per termocoppie sono componenti essenziali nei sistemi di misurazione della temperatura industriale. These cables are used to…