Traduzione


+86-371-67829333

Notizia

Perché le linee dei cavi in ​​fibra ottica si guastano?

cavo in fibra

Optical cable is a certain number of optical fibers form a cable core according to a certain method. Optical fiber cable is covered with a sheath, and some are also covered with an outer sheath to realize optical signal transmission.

The integrated wiring project is a relatively complex project, so it is impossible to ensure zero errors and zero faults in the construction of the project. Tuttavia, it is relatively easy to minimize the faults and mistakes of the integrated wiring project. There are four major reasons for the failure of communication fibra ottica cable lines.

Lightning Strike
The armored components of the optical cable are all metal conductors. If the power line is short-circuited or the lightning strikes the metal parts, a strong current will be generated to destroy the optical cable line equipment, and even serious casualties may occur.

Poor Insulation of Optical Cables
The basic structure of optical cable is generally composed of cable core, reinforcing steel wire, filler and sheath, eccetera. Besides, there are waterproof layer, buffer layer, insulated metal wire and other components as needed.

If the communication optical cable line is not insulated well, the operating strength will be greatly reduced. Due to stress corrosion and static fatigue after the splice box enters the water or is wet, and the optical cable will break in severe cases.

Fault at the Line Connector
Faults are most likely to occur at the line joints. Because the optical fibers no longer have the protection power to the original optical cable structure at the joints. So the daily operation and protection work can only be carried out by relying on the joint box. The probability of failure is greatly increased.

External Influence
Line faults are often caused from external forces. Since many communication optical cable lines are laid in the field, so the optical cable line could avoid effectively because of the damage of many external factors.

Here at Dati Cavo, you can get more information about cable products. Hope this was useful.

ZMS Cable F

Recent Posts

Forte andamento della domanda per il mercato delle fibre ottiche medicali in Europa

L’industria medica europea ha assistito a progressi significativi negli ultimi anni, driven by the integration

3 weeks ago

Quali cavi industriali vengono utilizzati nel lancio di un razzo dall'inizio alla fine?

Il successo del lancio di un razzo comporta una delle imprese ingegneristiche più complesse che si possano immaginare,…

1 month ago

Quali materiali in fibra ottica vengono utilizzati per produrre un cavo in fibra ottica?

I cavi in ​​fibra ottica sono diventati la spina dorsale delle moderne telecomunicazioni, offering high-speed data transmission over

1 month ago

Quanti nuclei sono normalmente i cavi in ​​rame ad alta tensione? Quali sono le applicazioni?

I cavi in ​​rame ad alta tensione sono componenti essenziali nella distribuzione e trasmissione dell'energia elettrica,…

2 months ago

What Are the High Voltage Lines Used in the Railroad System?

Railroad high voltage lines play a vital role in powering the railway systems that transport

3 months ago

What is the Difference Between Single-Mode and Multimode Fiber Optic Cables?

Fiber optic cables are critical components in modern communication networks, enabling high-speed data transmission over

3 months ago