翻訳


+86-371-67829333

ニュース

架空ケーブルの用途と機能

Overhead transmission lines are generally composed of foundations, 塔, hardware, insulators, ワイヤー, ground wires (含む OPGW 光ケーブル), and grounding facilities. Above the conductors of overhead transmission lines, the power lines erected to avoid direct lightning strikes on the conductors of the transmission lines are both overhead ground wires (referred to as ground wires), also known as lightning protection wires. In addition to lightning protection, overhead ground wires also play an important role in short-circuit current shunting.

The Difference of Overhead Line and Power Cable

架線: bare metal conductor, erected in the air, fixed on the tower with insulator strings, and insulated by air. Main advantage: 低価格. The disadvantage is that it occupies a lot of land resources (line corridors), which affects the appearance of the city.

電力ケーブル: Insulating medium is used to isolate the metal conductor from the outside world, and it is laid on the ground or underground. The main advantage is that it is more convenient to lay, occupies less land resources, and does not affect the appearance of the city. The disadvantage is that the cost is too high. In terms of safety, the industry currently believes that due to materials and manufacturing processes, the safety of overhead lines is better than that of power cables, and its failure rate is far lower than that of power cables.

The Function of the Overhead Ground Wire

It reduces the chance of lightning strikes the wire directly, and reduces the lightning overvoltage amplitude that the line insulation withstands. When the lightning strikes the top of the tower or the ground wire, the potential of the tower body is very high, and the voltage applied to the insulator string is equal to the difference between the potential of the tower body and the conductor potential. This voltage is generally much higher than the voltage on the insulator string when the lightning strikes the conductor directly. 低い, will not cause flashover discharge. でも, if the grounding resistance is large, the potential of the tower body will be very high, and a reverse flashover will occur at this time, which is commonly referred to as “counterattack”.

It has a coupling effect on the wire. When lightning strikes the top of the tower or the ground wire, the potential of the wire will rise due to coupling, so the coupling can reduce the voltage on the insulator string. したがって, in order to reduce the “counterattack”, when it is difficult to reduce the grounding resistance, you can use the shunting and coupling properties of the overhead ground wire to add a coupled ground wire under the wire.

Since the lightning protection wire is grounded, it can shield the effect of the induction lightning on the wire and reduce the overvoltage of the induction lightning.

Here at Veri Cabke, you can get more information about cables. ようこそ お問い合わせ.

ZMSケーブルF

Recent Posts

What Industry Cables Are Used in a Rocket Launch from Start to Finish?

The successful launch of a rocket involves one of the most complex engineering feats imaginable,…

4 hours ago

光ファイバーケーブルの製造に使用される光ファイバー材料?

光ファイバーケーブルは現代の電気通信の根幹となっています, offering high-speed data transmission over

2 weeks ago

高電圧銅線ケーブルは通常何芯ありますか? アプリケーションとは何ですか?

高電圧銅線ケーブルは、電力の配電と送電に不可欠なコンポーネントです。,…

1 month ago

鉄道システムで使用される高圧線とは何ですか?

Railroad high voltage lines play a vital role in powering the railway systems that transport

2 months ago

シングルモード光ファイバケーブルとマルチモード光ファイバケーブルの違いは何ですか?

光ファイバーケーブルは現代の通信ネットワークの重要なコンポーネントです, enabling high-speed data transmission over

2 months ago

産業用途で使用される一般的な制御ケーブルの種類は何ですか?

制御ケーブルは産業用途に不可欠なコンポーネントです, コミュニケーションを促進する, 信号伝送, and control between

2 months ago