공항 조명 케이블
Airport lighting cable, also known as a Type C airport cable, is a specific type of industrial cable used in airports to sustain runways.
베리 케이블 is a professional exporter of airfield lighting cables and special cables in China. Suppliers and airport cable manufacturers for a wide range of high-quality airport lighting cables to suit all kinds of applications. It is commonly the case that airfield lighting cables are required quickly and in small quantities. We use the latest technology available in our industry for the manufacturing of all airport lighting cables, which are now lighter, more durable, and more flexible. Our airfield lighting cables are manufactured to international standards with FAA, AC 150/5345-7E, and ICEA standards. The conductors of airport lighting cables are copper and aluminum.
Types of VERI Airport Lighting Cable
Faa-L-824 5kv 1X6mm2 8AWGAirport Ground Lighting Cable
VERI Airport Lighting Cable 5 케이 V is used for power transmission from the power generator to the lighting and guiding light. In lighting system of the airport, is buried directly in the ground or installed in a duct buried in the ground, rated voltage of 5 케이 V.
지휘자: Stranded bare or tinned copper.
Inner Semi-Conductor: Extruded semi-conducting compound.
단열재: XLPE.
Outer Semi-Conductor: Semi-conducting tape or extruded.
방패: Copper or brass tape(에스). Tinned copper wire braid can be offered upon request.
칼집: PVC. PE/XLPE can be offered upon request.
Dimensions and Weight
건설 | 아니요. of Strand | Nominal Insulation Thickness | 공칭 전체 직경 | Nominal Weight |
아니요. x mm^2/ AWG | – | mm | mm | kg/km |
1×6mm^2 | 7/19 | 2.3 | 11.0 | 180 |
1×8 | 7/19 | 2.3 | 14.3 | 298 |
1×6 | 7/19 | 2.3 | 15.4 | 366 |
1×4 | 7/19 | 2.3 | 17.0 | 513 |
TECHNICAL CHARACTERISTICS
정격전압: 5 케이 V
테스트 전압: 18 kV AC (5 minutes)
The maximum conductor temperature for normal operation is 90ºC
The maximum conductor temperature for short-circuit (5s maximum duration) is 250ºC
Continuous working current up to 20 에이
최소 굽힘 반경: 9 x D (디: cable diameter)
APPLIED STANDARDS
– FAA L-824 Type C – ANSI/NEMA WC 74/ICEA S-93-639-2012
Airport Ground Lighting Cables with shielded
데이터 airport lighting cables can be found in terminals and in airports all over the world. These cables are suitable for operation at 600v or 5kv in wet or dry locations. Conductors shall be annealed copper. The insulation layer of cables with different voltages is different.
예를 들어, the insulation layer of 600v cable should be a black cross-linked polyethylene insulation layer that is wear-resistant, moisture-proof and heat-resistant. The 5kv cable shall have a 20 mil extruded XLPE conductor shield. The voltage of 5kv cables should have cross-linked polyethylene that is abrasion, 수분, heat and track resistant.
표준&참고자료:IEC 60502, IEC 332-3, IEC 60228, FAA AC 1 50/5345-7이자형
- 도체 재료: Bare or tinned copper
- 도체 유형: Stranded
- 단열재: 에틸렌 프로필렌 고무(EPR)
- 방패: Tinned copper tape
- 색상: Green/Blue/Red/Grey/Black or as your requirements
- 전압: 5kv
신청
Specifically designed for airport security and airport systems, airport ground lighting cables illuminate runways during take-off and landing approaches. 이 케이블 are suitable for stationary applications such as taxiways, runways, navigation aids, and obstacle lighting. It can be installed in a conduit and directly buried.
5KV Airport Lighting Cable
Single conductor 5000-volt nonshielded power cables suitable for L-824 underground installation for lighting at airports per FAA L-824 Type C and AC 150/5345-53. Veri Cable offers a range of airports lighting cables from shield through to shielded, suitable for a range of primary and secondary circuits, available with PVC, Polyolefin, or HDPE sheathing. They are all XLPE insulated, providing a maximum operating temperature of 90 도. They are supplied with a voltage of 5kv.
표준&참고자료:CEA S-96-659, NEMA WC71
- 도체 재료: Bare or tinned copper
- 도체 유형: Stranded
- 단열재: 에틸렌 프로필렌 고무(EPR)
- 색상: Green/Blue/Red/Grey/Black or as your requirement
- 전압: 5kv
애플리케이션
The type of unshielded airport lighting cable is primarily used for series lighting circuits for runways, 제어 시스템, and other multi-purpose installations. It can be used for direct burial, conduit, or raceway.
The above airfield ground lighting cables consist of standard supply cables covering a wide range of specific applications and environments. 우리의 케이블 제품 have been widely used in many airport buildings and airport runways. For more information about airport lighting cables, please contact us freely.
The Feature of Airport Lighting Cable
Airport lightning cable is flexible, lightweight, and fire-resistant in nature. The conductor can be of different materials of Aluminum/Copper. The airport lighting cables are semiconductive screened, which allows the cable to be safely operated continuously to the ground. In the cable industry, an insulator is a part that covers the conductor so that current cannot flow and cause any electrical failure. The insulator can be wire or any insulating material. PVC/XLPE insulation is responsible for a fire-resistant feature.
Airport lighting cables are built for usage in between the constant current source and the isolating transformers in the series lighting circuits. Particularly lighting sources such as runways, taxiways, navigational aids, and obstruction lighting. It is fitted for use in direct burial connections, pulled into metallic or non-metallic conduit.
VERI 케이블 애프터 서비스 정보
첫 번째, 제품 품질 약속:
- 모든 제품의 제조 및 테스트에 대한 품질 기록 및 테스트 데이터가 있습니다. 케이블 제품.
- 제품 성능 점검을 위해, 제품의 전 과정과 성능을 직접 확인하시기를 진심으로 바랍니다.. 제품이 자격을 갖춘 것으로 확인된 후, 포장되어 배송될 거예요.
두번째, 제품 가격 약속:
- 제품의 높은 신뢰성을 보장하기 위해, 시스템의 재료 선택은 국내 또는 고품질 제품으로 구성됩니다..
- 동일한 경쟁 조건에서, 우리 회사 제품의 기술적 성능을 저하시키거나 제품 구성요소를 변경하지 않고, 합리적인 가격으로 성실히 제공해 드리겠습니다..
- 배달 시간 약속:
제삼, 제품 배송 시간:
사용자 요구 사항에 따라 가능한 한, 사전에 완료해야 하는 특별한 요구 사항이 있는 경우, 우리 회사는 특별히 생산 및 설치를 조직할 수 있습니다., 사용자의 요구를 충족시키기 위해 노력합니다..
네번째, 애프터 서비스 약속:
- 서비스 신조: 빠른, 결정적인, 정확한, 사려 깊고 철저하다.
- 서비스 목적: 고객 만족을 얻는 서비스 품질.
- 서비스 효율성: 보증기간 이내 또는 보증기간 외 장비에 고장이 발생한 경우, 공급자에게 통보한 후, 유지보수 담당자는 현장에 도착하여 다음 시간 내에 유지보수를 시작할 수 있습니다. 24 시간.
- 서비스 원칙: 케이블 제품의 보증기간은 12개월입니다.. 보증 기간 동안, 공급자는 품질상의 이유로 손상된 부품을 무료로 수리하고 교체합니다.. 보증기간 이후에 부품이 파손된 경우, 제공된 액세서리는 구매자의 인적 요인으로 인한 장비 손상 비용만 청구합니다., 공급자가 수리하거나 제공한 부속품은 원가로 계산됩니다..