Airport Lighting Cable
Airport lighting cable, also known as a Type C airport cable, is a specific type of industrial cable used in airports to sustain runways.
VERI kabel is a professional exporter of airfield lighting cables and special cables in China. Suppliers and airport cable manufacturers for a wide range of high-quality airport lighting cables to suit all kinds of applications. It is commonly the case that airfield lighting cables are required quickly and in small quantities. We use the latest technology available in our industry for the manufacturing of all airport lighting cables, which are now lighter, more durable, and more flexible. Our airfield lighting cables are manufactured to international standards with FAA, AC 150/5345-7E, and ICEA standards. The conductors of airport lighting cables are copper and aluminum.
Types of VERI Airport Lighting Cable
Faa-L-824 5kv 1X6mm2 8AWGAirport Ground Lighting Cable
VERI Airport Lighting Cable 5 kV is used for power transmission from the power generator to the lighting and guiding light. In lighting system of the airport, is buried directly in the ground or installed in a duct buried in the ground, rated voltage of 5 kV.
Dirigent: Stranded bare or tinned copper.
Inner Semi-Conductor: Extruded semi-conducting compound.
Isolasjon: XLPE.
Outer Semi-Conductor: Semi-conducting tape or extruded.
Skjold: Copper or brass tape(s). Tinned copper wire braid can be offered upon request.
Slire: PVC. PE/XLPE can be offered upon request.
Dimensions and Weight
Konstruksjon | Ingen. of Strand | Nominal Insulation Thickness | Nominell totaldiameter | Nominal Weight |
Ingen. x mm^2/ AWG | – | mm | mm | kg/km |
1×6mm^2 | 7/19 | 2.3 | 11.0 | 180 |
1×8 | 7/19 | 2.3 | 14.3 | 298 |
1×6 | 7/19 | 2.3 | 15.4 | 366 |
1×4 | 7/19 | 2.3 | 17.0 | 513 |
TECHNICAL CHARACTERISTICS
Nominell spenning: 5 kV
Test spenning: 18 kV AC (5 minutes)
The maximum conductor temperature for normal operation is 90ºC
The maximum conductor temperature for short-circuit (5s maximum duration) is 250ºC
Continuous working current up to 20 EN
Minimum bøyeradius: 9 x D (D: cable diameter)
APPLIED STANDARDS
– FAA L-824 Type C – ANSI/NEMA WC 74/ICEA S-93-639-2012
Airport Ground Lighting Cables with shielded
DATA airport lighting cables can be found in terminals and in airports all over the world. These cables are suitable for operation at 600v or 5kv in wet or dry locations. Conductors shall be annealed copper. The insulation layer of cables with different voltages is different.
For eksempel, the insulation layer of 600v cable should be a black cross-linked polyethylene insulation layer that is wear-resistant, moisture-proof and heat-resistant. The 5kv cable shall have a 20 mil extruded XLPE conductor shield. The voltage of 5kv cables should have cross-linked polyethylene that is abrasion, moisture, heat and track resistant.
STANDARDER&REFERANSER:IEC 60502, IEC 332-3, IEC 60228, FAA AC 1 50/5345-7E
- Ledermateriale: Bare or tinned copper
- Ledertype: Stranded
- Isolasjonsmateriale: Ethylene Propylene Rubber(EPR)
- Skjold: Tinned copper tape
- Farge: Green/Blue/Red/Grey/Black or as your requirements
- Spenning: 5kv
SØKNAD
Specifically designed for airport security and airport systems, airport ground lighting cables illuminate runways during take-off and landing approaches. These cables are suitable for stationary applications such as taxiways, runways, navigation aids, and obstacle lighting. It can be installed in a conduit and directly buried.
5KV Airport Lighting Cable
Single conductor 5000-volt nonshielded power cables suitable for L-824 underground installation for lighting at airports per FAA L-824 Type C and AC 150/5345-53. Veri Cable offers a range of airports lighting cables from shield through to shielded, suitable for a range of primary and secondary circuits, available with PVC, Polyolefin, or HDPE sheathing. They are all XLPE insulated, providing a maximum operating temperature of 90 grader. They are supplied with a voltage of 5kv.
STANDARDER&REFERANSER:CEA S-96-659, NEMA WC71
- Ledermateriale: Bare or tinned copper
- Ledertype: Stranded
- Isolasjonsmateriale: Ethylene Propylene Rubber(EPR)
- Farge: Green/Blue/Red/Grey/Black or as your requirement
- Spenning: 5kv
SØKNAD
The type of unshielded airport lighting cable is primarily used for series lighting circuits for runways, control systems, and other multi-purpose installations. It can be used for direct burial, conduit, or raceway.
The above airfield ground lighting cables consist of standard supply cables covering a wide range of specific applications and environments. Our kabelprodukter have been widely used in many airport buildings and airport runways. For more information about airport lighting cables, please contact us freely.
The Feature of Airport Lighting Cable
Airport lightning cable is flexible, lightweight, and fire-resistant in nature. The conductor can be of different materials of Aluminum/Copper. The airport lighting cables are semiconductive screened, which allows the cable to be safely operated continuously to the ground. In the cable industry, an insulator is a part that covers the conductor so that current cannot flow and cause any electrical failure. The insulator can be wire or any insulating material. PVC/XLPE insulation is responsible for a fire-resistant feature.
Airport lighting cables are built for usage in between the constant current source and the isolating transformers in the series lighting circuits. Particularly lighting sources such as runways, taxiways, navigational aids, and obstruction lighting. It is fitted for use in direct burial connections, pulled into metallic or non-metallic conduit.
Om VERI Cable ettersalgsservice
Først, Forpliktelse til produktkvalitet:
- Det er kvalitetsposter og testdata for produksjon og testing av alle kabelprodukter.
- For inspeksjon av produktets ytelse, Vi inviterer brukerne til å inspisere hele prosessen og ytelsen til produktet personlig. Etter at produktet er bekreftet å være kvalifisert, det vil bli pakket og sendt.
Sekund, produktprisforpliktelsen:
- For å sikre høy pålitelighet av produktet, materialvalget til systemet er laget av innenlandske eller høykvalitetsprodukter.
- Under samme konkurransevilkår, vårt selskap vil oppriktig gi deg en rimelig pris uten å redusere den tekniske ytelsen til produktet eller endre produktkomponentene.
- Forpliktelse til leveringstid:
Tredje, Produktets leveringstid:
Så langt det er mulig i henhold til brukerkrav, dersom det er spesielle krav som må fylles ut på forhånd, vårt firma kan spesielt organisere produksjon og installasjon, og streber etter å møte brukernes behov.
Fjerde, etter-salg service forpliktelse:
- Tjenesteprinsipp: rask, avgjørende, korrekt, gjennomtenkt og grundig.
- Tjenestemål: tjenestekvalitet for å vinne kundetilfredshet.
- Tjenesteeffektivitet: Hvis utstyret svikter innenfor garantiperioden eller utenfor garantiperioden, etter at leverandøren er varslet, vedlikeholdspersonellet kan nå stedet og starte vedlikehold innenfor 24 timer.
- Tjenesteprinsipp: Garantiperioden for kabelprodukter er tolv måneder. I garantiperioden, leverandøren vil reparere og erstatte delene som er skadet på grunn av kvalitetsårsaker gratis. Hvis delene er skadet utenfor garantiperioden, det medfølgende tilbehøret vil kun belaste kostnadene for utstyrsskade forårsaket av menneskelige faktorer til kjøperen, og tilbehøret som er reparert eller levert av leverandøren, beregnes til kostpris.