Twin & Earth Cable
Twisted Pair and Earth Wire manufactured by VERI Cables is a flexible, flat-sheathed mains wire rated at 300/500V and contains three conductors. As the name implies, there are one or two pairs of individually insulated current-carrying conductors and one bare conductor that is a central protective circuit (CPC) or ground. Commonly used in circuits for low power and lighting applications in residential and light commercial buildings.
We offer twisted and grounded cable with PVC jackets (6241Y, 6242Y, 6423Y, and 6244Y) and LSZH jackets (6241B, 6242B, 6243B, and 6244B), where the last digit indicates the number of cores in the cable.
2.5mm 1.5/6/10mm Twin & Earth Cable
Materiał przewodnika: Miedź
Insulation material: PCV
Napięcie znamionowe: 300v-500v, up to 750/1000V when used for indoor general installation.
Temperatura robocza: 70 ℃
Rozmiar: 1.5mm & 2.5mm &100M
Packing: 100m/roll in general.
Flat Twin Earth PVC Insulated Cable
Dyrygent: Silver plated copper / Nickel-plated copper
Izolacja: Polyimide / PTFE / Silicone rubber / PCV / XLPE
Napięcie znamionowe: 300V-600V
Packaging: 100m/wooden drum in general.
Commonly Section Size: 1mm² 1.5mm² & 2.5mm² which have solid (non-stranded) conductors, 4mm², 6mm², 10mm², 16mm² and higher have stranded conductors.
licencjat 7211 Twin & Earth LSZH Cable
Dyrygent: up to 4mm2 – Class 1 Solid Annealed Compacted Circular Copper Conductor, From 4mm2 – Klasa 2 Stranded Plain Annealed Compacted Circular Copper Conductor
Izolacja: XLPE
Osłona: LSZH(Low Smoke Zero Halogen)
Napięcie znamionowe: V300/500V
Temperature Limits: -25°C to +90°C
STANDARDY: licencjat 7211, IEC 60754-1, IEC 60754-2, IEC 61034, BS EN/IEC 60332-1-2, BASEC Approved.
Aplikacja: Used for fixed installations in dry or damp premises clipped directly to the surface, on trays, or in free air. Where mechanical protection is required, it can be laid in conduit or trunking.
6243Y & 6241Y Twin & Earth Cable
Dyrygent: copper
Izolacja: PVC Insulation complying with BS EN 50363-3.
Osłona: PVC sheath complying with BS7655.
Circuit Protective voltage: 300/500V.
Package: Wooden drum, Steel wooden drum, Coil, Box, itp.
Standard: BS6004,EN 50363-3.
Specyfikacja kabla
| Dyrygent | Insulation Thickness (mils) | Sheath Thickness (mils) | Nominal O.D. (mils) | Approx. Mass kg/km |
| Stranding No./mm | / | / | / | / |
| 2×1/1.13 | 0.6 | 0.9 | 6.6×4.2 | 55 |
| 2×7/0.50 | 0.6 | 0.9 | 7.4×4.7 | 80 |
| 2×7/0.67 | 0.7 | 1 | 9.0×5.6 | 125 |
| 2×7/0.85 | 0.8 | 1.1 | 10.7×6.6 | 155 |
| 2×7/1.04 | 0.8 | 1.1 | 11.8×7.2 | 215 |
Flat PVC Insulated Twin-Cord X03VH-H
What VERI Cable can ensure is that we can produce many of the twisted pair and grounding wire models on the market, but not all of them will be displayed 100% on the page, you can download the product catalog and send us an email with your order requirements and inquiry, and we will reply in a timely manner.
About Different Types of Twin & Grounding Cable
6241Y, 6242Y, and 6243Y Flat Grounding Cables, we can manufacture in sizes ranging from 1 mm to 16 mm with 1, 2, 3, or even multiple cores. These PVC sheathed surface wired cables or twisted pair and grounded flat cables are commonly used for wiring lighting equipment in homes or small commercial buildings. We promise that the cable conforms to British Standard BS6004 or BS7011 and can be fixed directly to a surface, routed through a cable tray, recessed, or laid in free air. Although known as an earth cable, these cables cannot be used for buried laying.
Why Are They Called "BLIŹNIAK" Cables?
The name “BLIŹNIAK” is given to this type of cable because, in terms of construction, they use the same flat PVC insulation and PVC sheath. They have two insulated cores and an uninsulated bare copper CPC, all contained in a flat outer jacket.
What is the difference between twin and flat twin & earth cable?
Twin and Earth Cable: Twisted Pair Ground Cable consists of two individually insulated current-carrying conductors and an uninsulated circuit protection conductor, this type of cable is the most commonly used in home lighting wiring today. Generally, the jacket is gray (PCV) or white.
Flat Twisted Pair and Earth Wire: Also known as FTE, the core consists of a current-carrying conductor and an individually insulated neutral conductor, with the circuit protection conductor (CPC) or ground wire exposed. It is not suitable for use in exposed outdoor environments because of the susceptibility of its outer jacket material to ultraviolet rays, although cable-specific protective varnishes can provide some UV protection.
Projects And Clients VERI Works With Uganda
VERI Cables has worked with customers on grounding wire projects as far back as 2018 when we worked with a company contracted for construction projects in Uganda on 12,000 meters of the twisted grounding wire.
Electrical Cables 2.5 mm2 twin with earth +1.5mm, Colour;Red and Black all in grey jacket, Packing;100mtres/roll
We have many loyal client partners in Uganda and have worked on many large power projects including but not limited to overhead lines, underground high voltage cables, itp. Feel free to contact us if you would like to know more about the project program guidance first.
Nasze profesjonalne usługi
Certyfikat Jakości
Produkty produkowane przez VERI Cables są zgodne z międzynarodowymi standardami takimi jak GB, IEC, licencjat, NFC, ASTM, Z, itp. Ponadto, nasz zespół techniczny może świadczyć usługi dostosowywania kabli do Twoich potrzeb.
Śledzenie klientów
VERI świadczy bezpłatne, profesjonalne usługi doradztwa kablowego, kompleksowe usługi w zakresie rozwiązań projektowych, i rozwiązania w zakresie szybkiej dostawy produktów.
Profesjonalny transport
Kable VERI’ początkowym celem jest zapewnienie szybkiej i bezpiecznej dostawy produktów, przy jednoczesnym zapewnieniu najlepszych rozwiązań w zakresie pakowania i transportu, aby zmniejszyć liczbę klientów’ koszty transportu znacznie.
Opakowanie kablowe
Opakowania kablowe VERI dostarczane są w drewnianych szpulach, pudełka z tektury falistej, i cewki. Końcówki są uszczelnione taśmą samoprzylepną BOPP i niehigroskopijnymi zaślepkami uszczelniającymi, które chronią końcówki kabli przed wilgocią. Możemy wydrukować wymagane logo na zewnętrznej stronie bębnów za pomocą wodoodpornego materiału, zgodnie z wymaganiami klienta.
