THHN THWN WIRE & CABLE
Are THHN And THWN The Same Wire?
The “THHN” portion of THHN cables stands for “Thermoplastic High Heat Resistant Nylon Coating”. “THWN” cables have the same characteristics, but the ‘W’ letters in THWN refer to ‘water resistance. ’The main difference between THHN and THWN cables is their maximum recommended operating temperature in wet locations.
SIZE(AWG): AWG10, 22, 20, 18, 16, 14, 12
VERI cables can be supported with specifications and other electrical features as per customer requirements. For a quote, Пожалуйста, не стесняйтесь обращаться к нам.
Cable Types
THHN/THWN 600V TC Wire & Cable
Дирижер: Multi-strand flexible annealed copper, ASTM B8 Class B
Изоляция: ПВХ & nylon coated
Stranding: Triple/multiple insulated conductors filled with filler, and nylon ripcord on the inside of the jacket for easy stripping
ножны: LSOH
THHN/ PVC TC These cables are usually used in industrial environments for supplying power to electrical machinery and equipment, and are mainly installed in cable racks and ducts, or can be buried directly.
Стандарты: UL1277, ICEA S-58-679, ICEA T-29-520, IEEE 1202/FT4
THHN/THWN 600V Class TC Control Cable
Дирижер: Multi-strand flexible annealed copper, ASTM B8 Class B
Изоляция: ПВХ & Nylon coated
Куртка: Heat, влага, and sunlight-resistant PVC
These TC control cables are mainly used in industrial power control circuits where small diameter and flame retardant features are required. They are commonly used in dry environments where the temperature does not exceed 90°C. Conductor temperatures up to 130°C under emergency load conditions and 250 °C under circuit conditions.
Insulation Thickness : 16-12AWG PVC 15mils(0.38мм), Nylon 4mils(0.10мм), 10AWG PVC 20mils(0.50мм) Nylon 4mils(0.10мм)
THHN / ТХВН-2 / MTW Cable
Дирижер: Multi-strand flexible annealed copper, ASTM B8 Class B
Изоляция: Rigid, heat and moisture resistant polyvinyl chloride (ПВХ) with nylon coated insulation
Цвет: Черный, other colors available
Type THHN/THWN conductors, installed through conduit, are suitable for service in commercial/industrial systems, кормушка, and branch circuit wiring. Category MTW cables are suitable for use in humid environments, with temperatures not exceeding 60°C in oil/coolant.
Стандарты: UL 83, CSA C22.2 No. 75-03, UL 1063, UL 758 (ГРУДЬ), ICEA S-95-658/NEMA WC 70
About VERI Cable After-Sales Service
Первый, Product Quality Commitment:
- There are quality records and testing data for the manufacture and testing of all кабельная продукция.
- For the inspection of product performance, we sincerely invite users to inspect the whole process and performance of the product in person. After the product is confirmed to be qualified, it will be packaged and shipped.
Второй, the product price commitment:
- In order to ensure the high reliability of the product, the material selection of the system is made of domestic or high-quality products.
- Under the same competitive conditions, our company will sincerely provide you at an affordable price without reducing the technical performance of the product or changing the product components.
- Delivery time commitment:
Third, Product delivery time:
As far as possible according to user requirements, if there are special requirements that need to be completed in advance, our company can specially organize production and installation, and strive to meet user needs.
Fourth, after-sales service commitment:
- Service tenet: fast, decisive, accurate, thoughtful and thorough.
- Service objectives: service quality to win customer satisfaction.
- Service efficiency: If the equipment fails within the warranty period or outside the warranty period, after the supplier is notified, the maintenance personnel can reach the site and start maintenance within 24 часы.
- Service principle: The warranty period of cable products is twelve months. During the warranty period, the supplier will repair and replace the parts damaged due to quality reasons for free. If the parts are damaged outside the warranty period, the provided accessories will only charge the cost the cost of equipment damage caused by human factors of the buyer, and the accessories repaired or provided by the supplier are calculated at cost.
