Një artikull që ju përcjell opsionet për kabllot e blinduara nënujore! E preferuara!

Kabllot e blinduara nëndetëse nënujore dominojnë transmetimin ndërkombëtar të thirrjeve zanore dhe trafikut të të dhënave.

Kjo është kryesisht për shkak se kabllot e tilla nëndetëse kanë avantazhin e besueshmërisë së lartë, sigurinë, dhe kapaciteti i ofruar në rrugët kryesore si dhe efektiviteti i kostos.

Nëse jeni duke luftuar me zgjedhjet dhe porositë e kabllove tuaja nëndetëse, then you can read this article before deciding to help you make a more precise choice.

 

Çfarë janë kabllot nëndetëse?

Submarine cables are cables wrapped in insulating material and laid on the ocean floor for telecommunication transmission.

Submarine cables are divided into submarine communication cables and submarine power cables.

Modern submarine cables use fiber optics as the material to transmit telephone and internet signals.

The above is a more standard and broad introduction to submarine cables.

But in reality, if you’re choosing submarine cables, you’ll find that there are even more factors that you need to consider.

You even have to understand what submarine composite cables are.

Procesi i vendosjes së kabllove të blinduara nëndetëse.
Submarine cables are divided into submarine communication cables and submarine power cables.

Submarine Composite Cables

To transmit the electricity generated by offshore wind turbines, a special cable is used.

It combines the functions of a cable and a fiber optic cable and is called a composite submarine cable.

Kjo undersea fiber optic cable is a stranded loose tube cable, surrounded with corrugated steel tape, steel wire armoring, and double sheath.

 

Armored Submarine Cables

As the functional unit structure of the cable is relatively fixed, and in principle, not as a bearing unit.

To improve the mechanical strength of the cable it is generally used in the line outside the functional unit to add one or more layers of steel wire armor.

Prandaj, the armor’s design becomes the key to the design of the mechanical strength of the cable.

 

The submarine cable plays the role of bothblood vessel” dhe “nervein the entire wind farm operation structure.

In addition to the collection and transmission of electrical signals. Its internal fiber optic unit is the wind farm communication and cable monitoring signal channel.

Functiontwo in oneof the sea cable, on the one hand, saves the submarine cable laying channel resources, greatly saving the project cost.

Ne anen tjeter, this collection of structures so that the weak armored fiber optic submarine cable has been better protected, and enhanced reliability.

 

So there are many choices for you about submarine cables.

 

Submarine Armored Cable Cross-Section Selection

When selecting submarine optoelectronics composite cables for connection or convergence between turbines and wind turbines. The impact of cable load loss caused by environmental conditions such as penetration of pipes or exposure to sunlight should be considered.

Gjithashtu, well large length of underwater armored cable distance transmission voltage drops the stability of the system and reactive power increases the system economy.

 

And because the structural requirements and environmental conditions of submarine cables are different for each wind farm.

In determining the cable cross-section, the wind farm design unit can consult with the submarine cable designers for more reference values of the calculation parameters of the submarine cable.

 

Armored Submarine Cable Voltage Selection

Në fakt, before the selection, you will specify the voltage parameters according to your project requirements and sea cable application.

But because the sea cable has two levels of medium voltage and high voltage, even extra high voltage sea cable.

So in some details, you still need to be careful about the choice of submarine cable voltage.

The voltage level of submarine cables can be selected according to the different forms of power grids in various countries and regions.

Për shembull, European countries choose 20kV or 30kV medium-voltage submarine cables to converge wind farm power to onshore or offshore booster stations.

Some Southeast Asian countries mainly use 35kV submarine cables.

 

Other Considerations

Due to the special environment of submarine cable applications. The different voltage levels of submarine photoelectric composite cables need to have different conductive cross-sections. And different mechanical strengths, seawater leakage and corrosion, and other structural characteristics.

And the use of different construction methods to adapt to the intertidal zone, subtidal zone, deep water, etj. To meet the special needs of the offshore wind power industry.

 

The specific use scenarios and mechanical strength requirements of different types of fiber optic cables shall comply with the following provisions:

1 Light submarine fiber optic cable applied in the deep sea section. Its mechanical strength should meet the requirements of deep-sea surface laying construction maintenance and salvage.

2 Armored submarine fiber optic cable applied in shallow sea section, near-shore section. Its mechanical strength should meet the requirements of buried construction maintenance and salvage.

3 Special protection type submarine fiber optic cables applied in the sea need special protection and should meet the corresponding technical requirements.

 

All of these are factors that you should consider when purchasing cables.

ZMSCABLE has always been doing a professional job in these counterfactuals. Because there are professional cable sales staff to solve these problems for customers.

 

 

Advantages of Armored Sea Cable

Most fiber optic cables are installed through overhead, përçues, dhe varrimi i drejtpërdrejtë.

Underwater fiber optic cables are laid underwater across rivers, lakes, and beaches.

Megjithatë, when it comes to places like rivers, lakes, and beaches. Laying them with traditional fiber optic cable laying methods will require a lot of fiber optic cable and installation costs.

Underwater armored fiber optic submarine cable perfectly solves the above problems by connecting the two ends through underwater laying.

Çmim i ulët

It saves a lot of fiber optic cables and the laying is simplified.

High Stability

As fiber optic cables are located under rivers and lakes, they are not affected by wind and most animals on the ground.

High Safety

Underwater submarine cables offer high transmission capacity, high reliability, siguri të lartë, jetë e gjatë shërbimi, and low maintenance costs.

High Resistance to Extrusion

Submarine cables have good extrusion resistance.

Its armor layer, although heavy, provides the cable with better tensile strength.

There is also a strong resistance to interference and good confidentiality.

Kabllot nëndetëse ndahen kryesisht në dy lloje: transmetimi i komunikimit dhe transmetimi i energjisë.
Modern submarine cables use fiber optics as the material to transmit telephone and Internet signals.

Types of Submarine Cables

Depending on the application, armored submarine cables can be divided into submarine single armored (në), submarine double armored (DHE), submarine lightweight protected (LWP), submarine lightweight (LW), and submarine lightweight armored (LWA) kabllot me fibra optike.

 

SA Submarine Cables

Kabllo nënujore me një shtresë të blinduar (në) is a single layer of armored steel wire outside the LW cable, i përshtatshëm për zona të varrosura brenda 2000 m thellësi uji,

DA Cable

Suitable for deployment, burial, ndërtimi, and recovery in areas at a depth of 500 metra, providing the protection required in that depth range.

And should be weighted to prevent tidal waves from moving submarine cables.

LWP Cable

Suitable for deployment, ndërtimi, and recovery in water depths greater than 1,000 meters and in areas of at least 8,000 metra, but with some resistance to abrasion and fish bites.

LW Submarine Cables

Suitable for deployment, ndërtimi, and recovery in water depths greater than 1000 meters and at least 8000 metra.

LWA Cable

Suitable for deployment, burial, ndërtimi, and recovery in areas with water depths of 20 meters and 1500 meters and an unburied depth of 2000 metra.

 

Në të ardhmen, with the development of offshore wind energy resources gradually saturated, wind power, rising tariffs down into an inevitable trend. Offshore wind power is bound to move towards distant sea-scale development.

Long-distance, large-scale power output will reduce the power loss on the cable to put forward new needs.

It can be predicted that in the future offshore wind power project, the use of flexible, DC cable delivery will be a trend. All the above sea cable types can be clicked as amicable consulting.