Çeviri


+86-371-67829333

Haberler

Four Reasons For the Failure of Fiber Optic Cable lines

The optical cable is mainly composed of optical fiber, plastic protective sleeve and plastic outer skin. There is no metal such as gold, silver, copper and aluminum in the optik kablo.

The basic structure of optical cable is generally composed of cable core, reinforcing steel wire, filler and sheath, vesaire. Ek olarak, there are waterproof layer, buffer layer, insulated metal wire and other components as needed.

The integrated wiring project is a relatively complex project, so it is impossible to ensure zero faults in the construction of the project. Fakat, it is relatively easy to minimize the faults and mistakes. There are four major reasons for the failure of fiber optic cable lines.

The Impact of Lightning

The armored components of the optical cable are all metal conductors. If the power line is short-circuited or the lightning strikes the metal parts, a strong current will be generated to damage the optical cable line equipment. And even serious casualties will occur.

The Insulation of the Optical Cable Is Not Good

If the optical cable line is not well insulated, the operating strength of the optical cable will be greatly reduced due to stress corrosion and static fatigue. After the splice box enters the water or is wet, and the optical cable will break in severe cases.

The Influence of External Forces

​Line faults are often caused by external forces. Since many optical cable lines are laid in the field, the general burial standard is deep below the stratum. So the damage of many external factors to the optical cable line cannot be effectively avoided

Fault at the Line Connector

Faults are most likely to occur at the line joints. This is because the optical fibers at the joints no longer have the protection power to the original optical cable structure or the protection power has been significantly weakened. So the daily operation and protection work can only be carried out by relying on the joint box. The probability of failure is greatly increased.

Optical fiber cable is a new generation of transmission medium. Compared with copper medium, optical fiber has greatly improved in terms of security, reliability and network performance. Ek olarak, the bandwidth of optical fiber transmission greatly exceeds that of copper cables. And about the maximum connection distance, it supports is more than two kilometer. And it is an inevitable choice for building larger-scale networks. Because the fiber optic cable has the advantages of good electromagnetic interference resistance, güçlü gizlilik, hızlı hız, and larger transmission capacity. Its price is also relatively expensive, and it is rarely used in household occasions.

For more information about cable products, hoş geldiniz bize Ulaşın doğrudan.

VERI Kablosu

ZMS Kablo F

Recent Posts

What Are the High Voltage Lines Used in the Railroad System?

Railroad high voltage lines play a vital role in powering the railway systems that transport

1 day ago

What is the Difference Between Single-Mode and Multimode Fiber Optic Cables?

Fiber optic cables are critical components in modern communication networks, enabling high-speed data transmission over

4 days ago

What are the Common Types of Control Cables Used in Industrial Applications?

Control cables are essential components in industrial applications, facilitating communication, sinyal iletimi, and control between

1 week ago

What are thermocouple cables? What are they most commonly used for?

Thermocouple cables are essential components in industrial temperature measurement systems. These cables are used to

4 weeks ago

What is a Communication Circuit? What Communication Cables are Needed?

In today's interconnected world, the seamless transfer of information is the backbone of modern communication.

1 month ago

What is a Drag Chain Cable? The Ultimate Guide to Using Drag Chain Cables

Drag chain cables, also known as cable carriers or energy chains, are specialized cables designed

2 months ago