AIRFIELD LIGHTING CABLE
- FAA L824 Cable
- 400Hz Cable
- RG7H1R Cable
- RHV and RHZ1 Cable
- FL2XCY and FLYCY Cable
- C33-224 / C33-225 Cable
VERI Cables specializes in designing and supplying a wide range of airport lighting cables for safety and system stability at airports, including runway lighting system cables for aircraft during takeoff and landing, large space transmission and equipment distribution cables, and wires for airport construction. These cable models have passed strict resistance and quality tests so you can choose confidently. This page will introduce you to the hot models of airport lighting cables, and with complete technical information you can contact us anytime.
FAA L-824 Airfield Ground Lighting Cable (AGL)
Cables of type FAA-L824 are generally categorized as type A, Б, and C, structurally ambient with and without metal shielding, all with XLPE insulation, generally single conductor low voltage power cables, with a universal rated voltage of 600V, 2кВ, or 5kV depending on the application scenario. The maximum operating temperature is +90°C. The size of these lighting cables manufactured by VERI Cables is strictly controlled and determined by the material and the specific application. The maximum operating temperature is +90°C. VERI Cables produces these lighting cables in tightly controlled sizes, determined by the material, the construction layer, and the specific application. For additional support with cable selection, please contact our team.
CONDUCTORS: Stranded soft drawn bare copper conductor per ASTM B-3 & B-8.
СТАНДАРТИ: ETL Certified, ICEA S-96-659, NEMA WC71
ЗАСТОСУВАННЯ: Airport Lighting Cables are suitable for FAA Type L-824 C and Airport Type L-824 underground lighting circuits and are typically installed in conduits, протоки, and overhead lines, and are also well suited for direct underground burial. It can also be used in non-UL applications and can withstand voltages up to 5000 volts.
Кабелі VERI’ factory technical engineering team has extensive experience in the design, manufacture, and supply of airport lighting cables, having been involved in the infrastructure of several airport projects in China and abroad. We also provide relevant transmission cable accessories to guide AGL installations and create perfectly smooth transmission lines to ensure the highest level of safety. Please feel free to contact us about your project and specific cable requirements.
RG7H1R Lighting Cable
RG7H1R cables also belong to the category of PVC-insulated, rubber-sheathed cables suitable for airport lighting equipment supplying power to runway, taxiway, and apron lights, as well as navigational and obstacle aids. These cables, manufactured by VERI in compliance with the CPR standard, are also widely used in European fixed cabling that is either run or terminated within a structure.
Диригент: red copper, rigid, class 2.
Inner sheath: semi-conducting material.
Ізоляція: HEPR has G7 quality.
Зовнішній шар: semi-conducting layer, special high module HEPR.
Щит: red copper wire.
Outer sheath: PVC material of RZ/ST2 quality.
колір: червоний.
STANDARD: CEI 20-13, IEC 60502, CEI 20-16, CEI EN 60332-1-2 (IEC 60840 для 26/45 кВ).
ЗАСТОСУВАННЯ: This cable is suitable for the transportation of energy between substations and large users. There is no problem if it is left for free-hanging or installed in a pipe or channel. Laying underground is not recommended.
RG7H1R cables are generally single-core, with a conductor cross-section of 16mm, other sizes are available on request. It is a distribution cable with a rated voltage of 3.6/6kV and complies with the regulations for airport transmission installations. If your project is unique or requires materials for specific environments, please feel free to contact our factory team to discuss.
FL2XCY&FLYCY Lighting Cable
FL2XCY and FL2XCYRY with PVC and XLPE insulation are used in medium voltage power lighting systems for primary and secondary series circuits in airport lighting, with rated voltages ranging from 2Kv to 10kV, with conductors made of copper and shielded with copper tape. We promise that this type of cable manufactured by VERI Cables is robustly flame retardant, oil resistant, and UV resistant. These cables are also highly impact and weather resistant considering the environment in which this type of airfield cable is installed.
Maximum Conductor Temperature: 90℃
Short Circuit Temperature: 250℃
Operating Temperatures: -40℃~+90℃
Мінімальний радіус вигину: 15×OD
Flame Retardant: Yes
Oil Resistant: Yes
FL2XCY and FLYCY single core airport cables are usually standard with relatively small copper conductors from 6mm size upwards and are often used for critical cabling of airport lighting equipment, as well as for connecting series circuits between constant current regulators and isolation transformers, and series circuits between isolation transformers. If you need a larger size or alternative voltage, be sure to contact us. See our FAA L-824 certified cable series for other models.
Наші професійні послуги
Сертифікат якості
Продукція, вироблена VERI Cables, відповідає міжнародним стандартам, таким як GB, IEC, BS, NFC, ASTM, ВІД, тощо. Крім того, наша технічна команда може надати послуги з налаштування кабелю відповідно до ваших потреб.
Відстеження клієнтів
VERI надає безкоштовні професійні консультаційні послуги щодо кабельного телебачення, комплексні послуги проектного рішення, і рішення для швидкої доставки продуктів.
Професійні перевезення
Кабелі VERI’ початкова мета полягає в тому, щоб забезпечити швидку та безпечну доставку продуктів, а також забезпечити найкраще пакування та транспортні рішення для зменшення кількості клієнтів’ великі транспортні витрати.
Упаковка кабелю
Упаковка кабелю VERI поставляється в дерев'яних котушках, гофроящики, і котушки. Кінці кабелю заклеєні самоклеючою стрічкою BOPP і негігроскопічними ковпачками для захисту кінців кабелю від вологи.. Ми можемо надрукувати необхідний логотип на зовнішній стороні барабанів водонепроникним матеріалом відповідно до вимог замовника.
