Low Voltage Power Cable
Low-voltage cables manufactured by ZMS are used for used to transmit low-voltage signals, as opposed to traditional 110/220V AC cables. Low-voltage cables are usually made of copper or aluminum, with insulation including PVC, rubber, or fiberglass. VERI low-voltage cables are suitable for transmission lines and distribution with a voltage of 0.6/1 KV. Na anyị nwere eriri voltaji dị iche iche nwere ọkwa voltaji dị iche iche: elu voltaji eriri, ọkara voltaji cable.
Types of Low Voltage Cables
Low Voltage Power Cable With Oil And Acid Resistance
ZMS produces this type of cable, the oil-resistant characteristics of the cable in the maximum degree of protection against static electricity. Oil and acid-resistant cable is a weak signal measuring cable, suitable for static prone, fuel pools, and other special working environments. With anti-static, oil-resistant, anti-tension, anti-bending characteristics. The minimum bending radius of the cable is not less than 5 times the diameter of the cable, the cable can withstand a maximum tensile force of 200kg, and the cable winding and bending several times more than 3000 times.
Features
100% complete length, no less but more.
99.99% oxygen-free copper, low resistance, high conductivity.
100% environmental material, fire retardant
Onye nduzi | Copper Core |
Insulation Material | XLPE Insulation |
Voltage Type | LOW VOLTAGE <6kv |
Color | Customized Color |
Jacket | PVC PE XLPE |
Packaging Details | Carton, Wooden Box, Wooden Roll |
Certification | ISO9001/ISO14001 /OHSAS18001/CCC |
Model Number | YJV-1 |
Standard | IEC60502 |
0.6/1kV Low Voltage Underground CU XLPE SWA PVC 4 Core Armored Electric Copper Cable
Igwe ọkụ dị ala na-ezo aka na ngwa ndị chọrọ obere akụrụngwa, gụnyere ekwentị, waya nche, ọkụ mkpu, Walkie-okwu, na ịntanetị. Ọzọkwa, the types of low-voltage cables can divide into AC voltage and DC voltage. Because as a professional LV cable manufacturer, anyị nwere ike gboo mkpa gị niile.
The power cable is manufactured according to IEC 61089/BS 7870/DIN 48201/ASTM B399/BS EN50183/NFC33-209.
It is suitable to be laid in the power cable line with a rated voltage of 0.6/1kv (U0/U) for power transmission.
The low voltage power cable of ZMS cable has good electrical and mechanical properties, the best chemical resistance, environmental stress, and flame resistance. Ọzọkwa, its structure is simple, easy to use, and saves project costs. It is suitable for laying indoor, tunnel, canal, and underground laying areas.
Onye nduzi | Copper Core |
Insulation Material | PVC |
Voltage Type | LOW VOLTAGE <6kv |
Color | Customized Color |
Jacket | PVC |
Packaging Details | Wooden Drums |
Certification | ISO9001, CCC |
Model Number | YJV32 YJVV22 |
Size | Customized Sizes |
Ngwa:
Laid indoors, in tunnels, and pipes.
Able to withstand certain laying traction.
Not able to withstand mechanical external forces.
Single-core cable is not allowed to be laid in magnetic-made material pipes.
Operation Characteristic:
1. The maximum rated temperature
When the cable is used for a long time, the maximum working temperature of the core does not exceed 900C and the temperature of
the conductor shall not exceed, 2500C at a short circuit for 5 seconds.
2. Installation requirement
The installation of cables is not limited by the difference in elevation along the route. The ambient temperature should not be
less than 00C during installation. The permissible bending radius for cable shall be complied with the following regulations:
For single core: 20(D+d) +/_ 5%
For multicore: 15(D+d) +/_ 5%
(D–actual outer diameter of the cable; d–actual outer diameter of the conductor)
Single core cable used in AC circuits shall be without armor or use non-magnetic metal material armor and shall not be laid in
magnetic ducts.
0.6/1kV ABC —Overhead Conductors 7/19/37 wires Multiple strands XLPE Outdoor Aluminum Aerial
Nke a bụ ụdị PVC, HEPE, and XLPE insulated aerial cable of copper core, aluminum core, or aluminum alloy core. And they are suitable for overhead power lines of AC-rated voltage 0.6/1KV and below. The production standard for anti-flaming and fire-resistant cables is IEC 61089/BS 7870/DIN 48201/ASTM B399/BS EN50183/NFC33-209. A na-ejikarị ya na ahịrị nnyefe ọkụ na ahịrị nkesa ọkụ eletrik. Because they have such good characteristics as simple structure and convenient maintenance. And low-cost large transmission capacity. They are also suitable for laying across rivers valleys and geographical places.
Main of Cable Features
2. Long-term allowable temperature of the cable: The allowable temperature of 105 Cable should not exceed 105℃, the allowable
temperature of other models should not exceed 70℃.
Onye nduzi | Aluminum |
Insulation Material | XLPE |
Voltage Type | LOW VOLTAGE <6kv |
Color | Black |
Packaging Details | Wooden Drums |
Certification | ISO9001/ISO14001 /ISO45001/CE |
Size | Customized Sizes |
About VERICABLE
Veri Cable nwere ọtụtụ ụzọ iji chebe eriri gị, nwere nkwakọ mbupu siri ike na ọkachamara yana mkpuchi zuru oke. Tupu mbupu, anyi eriri a na-akwakọba n'ime osisi reels na corrugated igbe. N'oge njem, iji chebe eriri eriri site na mmiri mmiri, anyị na-eji BOPP teepu na-ejide onwe ya na-abụghị hygroscopic mechie ha.
Ọ bụrụ na enwere nsogbu dị mma dịka nkwakọ ngwaahịa mebiri emebi na mmebi elu ngwaahịa n'ebe ahụ mgbe a na-anata ngwongwo, ọ bụrụ na achọpụtara na ngwongwo ahụ bụ eziokwu, ngwa ahịa adabaghị n'usoro, na nsogbu dị mma nke onye ahịa chọtara n'oge ntinye, A kwadoro usoro ịtọgbọ na iji ya bụ nsogbu dị mma nke ngwaahịa ahụ n'onwe ya, Ọ bụrụ na nnyefe adịghị na nkwekọrịta chọrọ, Biko kpọtụrụ ụlọ ọrụ anyị ozugbo.