Direct Burial Fiber Cable
VERI cable manufacturer’s direct burial fiber optic cable has good resistance to water, lateral pressure, and stretching. Direct burial cable is designed to be buried underground without a conduit. As a general rule, direct burial cable should be buried at least 24 inches to protect it from physical damage. Because direct burial fiber optic cable is perfect for underground installation. Our cable is armored and rodent-resistant. A rugged armored fiber cable to be buried directly in the ground or for installation in a conduit where rodents can still get inside.
Inoltre, our company also sells a variety of cavi aerei, cavi sottomarini, cavi di tensione, cavi di controllo, eccetera. If you need anything, Non esitate a contattarci.
Direct Burial Fiber Optic Cable Types
Double Armored 144 Core Fiber Optic Cable Sheaths GYFTA53
La struttura del GYFTA53 cable is that the 250 µm direct burial fiber is sheathed in a loose tube made of high-modulus material, and the flexible tube fills with a waterproof compound. The tubes are filled with a water-resistant filling compound. A Fiber Reinforced Plastic (FRP) is located in the center of the core as a non-metallic strength member. The tubes (e riempitivi) are stranded around the strength member into a compact and circular core. An aluminum Polyethylene Laminate (APL) is applied around the cable core. Then the cable core is covered with a thin polyethylene (PE) guaina interna, which is filled with jelly to protect it from water ingress. After a corrugated steel tape armor is applied, the cable is completed with a PE outer sheath.
Features of GYFTA53 Optic Fiber
- Good mechanical and temperature performance
- High-strength loose tube that is hydrolysis resistant
- Special tube filling compound ensures the critical protection of fiber
- Crush resistance and flexibility
Conduttore | multi strand super fine stranded oxygen free copper wire |
Numero di conduttori | ≥ 10 |
Fiber Type | G652D Single mode or as your request |
Corazzato | Steel Tape |
Cable Sheath | PE PVC LSZH HDPE/AT/Customized |
Inner Sheath | PE |
Installazione | Conduit/Aerial/Direct/Air Blown |
Outer Sheath | PE |
- Single Fiber Reinforced Plastic as the central strength member
- Loose tube-filling compound
- 100% cable core filling
- APL moisture barrier
- PSP enhancing moisture-proof
- Water-blocking material
Application of GYFTA53 Optical Cable
- Long-distance communication, interoffice communication.
- It is especially suitable for occasions with high requirements for moisture-proof and rodent-proof.
GYTY53 Direct Buried Double Sheathed Optical Cable
GYTY53 underground fiber optic cable is an outdoor communication optical cable of metal strength member of the loose tube jelly-filled structure, with polyethylene laminated sheath longitudinally covered with corrugated steel-tape armored polyethylene outer sheath.
The loose tubes are made of high-modulus plastics (PBT) and filled with water-resistant filling gel. Loose tubes are stranded around the metallic central strength member, and the cable core is filled with the cable-filling compound. Polietilene (PE) is extruded as an inner sheath, then water-swollen yarns and corrugated steel tape are longitudinally applied over the inner sheath, and combined with a durable PE sheath.
Cable type | Underground outdoor GYFTY53 fiber optic cable |
Material of jacket | HDPE/LSZH sheath/flame retardant sheath/anti-rodent sheath |
Temperatura di esercizio | -40deg℃to + 70deg℃ |
Fiber type | G652/G655/62.5/50/OM3 |
Colore | Nero |
Fiber core | 2-288nuclei |
Bending Radius | Static 12.5*Cable-diameter: Dynamic 25*Cable-diameter |
Tube | Loose tube stranded/SZ stranded |
Fiber Count | Nominal Diameter (mm) | Nominal Weight (kg/km) | Max Fibers per Tube | Max No. of (Tubes+fillers) | Allowable Tensile Load (N) | Allowable Crush Resistenza (N/100mm) | ||
Short Term | Long Term | Short Term | Long Term | |||||
2~30 | 12.2 | 142 | 6 | 5 | 3000 | 1000 | 3000 | 1000 |
32~48 | 12.8 | 155 | 8 | 6 | 3000 | 1000 | 3000 | 1000 |
50~72 | 13.6 | 170 | 12 | 6 | 3000 | 1000 | 3000 | 1000 |
74~96 | 15.0 | 192 | 12 | 8 | 3000 | 1000 | 3000 | 1000 |
98~144 | 16.6 | 220 | 12 | 12 | 3000 | 1000 | 3000 | 1000 |
>144 | Available upon customer’s request |
Feature
- High-quality optical fiber provides good transmission performance
- Accurate fiber excess length control ensures excellent mechanical and temperature performance
- Special filling gel filled loose tubes provide perfect optical fiber protection
- All section water blocking provides reliable performance of moisture-proof and water block
- Corrosion resistance phosphate steel wire with high Young’s modulus as central strength member gives high tensile strength
- Longitudinal corrugated steel tape presents desirable crush resistance
- Strict craft and raw material control enable a lifespan of over 30 anni
Application of GYTY53 Optical Cable
- Double sheath structure, excellent crush resistance performance.
- It can effectively prevent the damage to rodents.
GYXTW Single Mode 12 Core Armored Optic Cable
GYXTW Armored Uni Tube Single Jacket/Single Armored cable is designed with the flexibility and versatility required for today’s most demanding installations, including direct buried. The metallic armor is used when mechanical protection is desired.
Caratteristiche:
- Uni-tube gel-filled construction for superior fiber protection.
- Metallic armor to protect cable from rodent attack and mechanical damage.
- Embedded steel wire provide desirable tensile strength and crush resistance.
- Compact, easy to install.
- UV and waterproof design.
Cable type | Underground outdoor GYFTY53 fiber optic cable |
Material of jacket | PVC, LSZH, PE, PU, TPU, ect. |
Temperatura di esercizio | -40deg℃to + 70deg℃ |
Fiber type | G652/G655/62.5/50/OM3 |
Colore | Nero |
Fiber core | 2-288nuclei |
Bending Radius | Static 12.5*Cable-diameter: Dynamic 25*Cable-diameter |
Tube | Loose tube stranded/SZ stranded |
Cable pack | Wooden Drum |
Fiber | 2-24 fiber |
Strength Member: | Steel Wire |
Armatura | Corrugated steel tape |
Giacca esterna | Black UV Polyethylene(PE) |
Cable model | Number of fibers | Cable diameter mm | Cable weight kg/km | Allowable stretching force Long/short term N | Allowable crushing force Long/short term N/100mm | Raggio di curvatura Static/dynamic mm |
GYXTW-2~12 | 2~12 | 10.6 | 124 | 1000/3000 | 1000/3000 | 10D/20D |
GYXTW-14~24 | 14~24 | 12.5 | 149 | 1000/3000 | 1000/3000 | 10D/20D |
GYXTW-26~36 | 26~36 | 14.0 | 190 | 1000/3000 | 1000/3000 | 10D/20D |
GYXTW-38~48 | 38~48 | 15.0 | 216 | 1000/3000 | 1000/3000 | 10D/20D |
Return Loss | dB | ≥55 | ≥50 | ≥60 | ≥35dB | ≥35dB |
Insert-pull Test | dB | ≤0.2 | ≤0.2 | ≤0.3 | ≤0.15 | ≤0.15 |
Interchangeability | dB | ≤0.1 | ≤0.1 | ≤0.15 | ≤0.1 | ≤0.1 |
Intervallo di temperatura | ℃ | -40~+80 | ||||
Durabilità(1/Matings) | ≥1000 | |||||
Resistenza alla trazione (N) | ≥90 (Φ3.0), ≥70 (Φ2.0), Φ0.9 | |||||
Fiber | 9/125um, 50/125um,62.5/125um,ect | |||||
Diameter | 0.9mm 2.0mm, 3.0mm etc | |||||
Nuclei | Simplex, duplex, 4nuclei, 6nuclei, 8nuclei, 12cores etc |
Applicazione:
- Interbuilding voice or data communication.
- Installed in duct, underground conduit.
- FTTx.
I nostri servizi professionali
Certificazione di qualità
I prodotti fabbricati da VERI Cables sono conformi agli standard internazionali come GB, CEI, Che cavolo, NFC, ASTM, DA, eccetera. Inoltre, il nostro team tecnico può fornire servizi di personalizzazione dei cavi per le vostre esigenze.
Monitoraggio dei clienti
VERI fornisce servizi di consulenza professionale gratuita sui cavi, servizi di soluzione di progetto one-stop, e soluzioni rapide di consegna dei prodotti.
Trasporto professionale
Cavi VERI’ L'obiettivo iniziale è garantire una consegna rapida e sicura dei prodotti fornendo allo stesso tempo le migliori soluzioni di imballaggio e trasporto per ridurre i clienti’ il trasporto costa molto.
Imballaggio cavi
L'imballo del cavo VERI viene fornito in bobine di legno, scatole di cartone ondulato, e bobine. Le estremità sono sigillate con nastro autoadesivo BOPP e cappucci sigillanti non igroscopici per proteggere le estremità del cavo dall'umidità. Possiamo stampare il logo richiesto all'esterno dei fusti con materiale impermeabile secondo le esigenze del cliente.