Direct Burial Fiber Cable
VERI Cable manufacturer’s direct burial fiber optic cable has good resistance to water, lateral pressure, and stretching. Direct burial cable is designed to be buried underground without a conduit. As a general rule, direct burial cable should be buried at least 24 inches to protect it from physical damage. Because direct burial fiber optic cable is perfect for underground installation. Our cable is armored and rodent-resistant. A rugged armored fiber cable to be buried directly in the ground or for installation in a conduit where rodents can still get inside.
Barra minn hekk, kumpanija tagħna tbigħ ukoll varjetà ta ' kejbils overhead, Kejbils taħt il-baħar, Kejbils tal-vultaġġ, Kejbils tal-kontroll, eċċ. If you need anything, jekk jogħġbok tħossok liberu li tikkuntattjana.
Hot Models & Applications of Direct Burial Fiber Cable
G652D Single Mode Fiber Optic Cable
Karatteristiċi: low attenuation, long distance transmission, affordable.
Applications: Widely used in metropolitan area networks (MAN), long-distance communications and fiber-to-the-home (FTTH).
G657A1 A2 Bent Fiber Optic cable
Karatteristiċi: excellent bending resistance, suitable for complex laying environment.
Applikazzjoni: For laying fiber optic cables in dense urban areas.
OM3 Multimode Fiber Optic Cable
Karatteristiċi: High bandwidth, suitable for short distance data transmission at 100Gbps.
Applications: data centers, local area networks (LAN).
Note: Including some OM4 advanced multimode fiber and special models of direct buried fiber optic cables, waterproof fiber optic cables, eċċ., VERI cables are supplied, please feel free to contact!
Double Armored 144 Core Fiber Optic Cable Sheaths GYFTA53
L-istruttura tal- GYFTA53 cable is that the 250 µm direct burial fiber is sheathed in a loose tube made of high-modulus material, and the flexible tube fills with a waterproof compound. The tubes are filled with a water-resistant filling compound. A Fiber Reinforced Plastic (FRP) is located in the center of the core as a non-metallic strength member. The tubes (u fillers) are stranded around the strength member into a compact and circular core. An aluminum Polyethylene Laminate (APL) is applied around the cable core. Then the cable core is covered with a thin polyethylene (PE) għant ta 'ġewwa, which is filled with jelly to protect it from water ingress. After a corrugated steel tape armor is applied, the cable is completed with a PE outer sheath.
Features of GYFTA53 Optic Fiber
- Good mechanical and temperature performance
- High-strength loose tube that is hydrolysis resistant
- Special tube filling compound ensures the critical protection of fiber
- Crush resistance and flexibility
Konduttur | multi strand super fine stranded ossiġenu wajer tar-ram ħielsa |
Number of Conductors | ≥ 10 |
Fiber Type | G652D Single mode or as your request |
Armored | Steel Tape |
Cable Sheath | PE PVC LSZH HDPE/AT/Customized |
Ghat ta' ġewwa | PE |
Installation | Conduit/Aerial/Direct/Air Blown |
Ghat ta' Barra | PE |
- Single Fiber Reinforced Plastic as the central strength member
- Loose tube-filling compound
- 100% cable core filling
- APL moisture barrier
- PSP enhancing moisture-proof
- Water-blocking material
Application of GYFTA53 Optical Cable
- Komunikazzjoni fuq distanzi twal, interoffice communication.
- Huwa adattat b'mod speċjali għal okkażjonijiet b'rekwiżiti għoljin għal prova ta 'umdità u annimali gerriema.
GYTY53 Kejbil ottiku b'kisi doppju midfun dirett
GYTY53 underground fiber optic cable is an outdoor communication optical cable of metal strength member of the loose tube jelly-filled structure, with polyethylene laminated sheath longitudinally covered with corrugated steel-tape armored polyethylene outer sheath.
The loose tubes are made of high-modulus plastics (PBT) and filled with water-resistant filling gel. Loose tubes are stranded around the metallic central strength member, and the cable core is filled with the cable-filling compound. Polietilene (PE) is extruded as an inner sheath, then water-swollen yarns and corrugated steel tape are longitudinally applied over the inner sheath, and combined with a durable PE sheath.
Cable type | Underground outdoor GYFTY53 fiber optic cable |
Material of jacket | HDPE/LSZH sheath/flame retardant sheath/anti-rodent sheath |
Operating temperature | -40deg℃to + 70deg℃ |
Fiber type | G652/G655/62.5/50/OM3 |
Kulur | Iswed |
Fiber core | 2-288qlub |
Raġġ tal-liwi | Static 12.5*Cable-diameter: Dynamic 25*Cable-diameter |
Tube | Loose tube stranded/SZ stranded |
Fiber Count | Nominal Diameter (mm) | Nominal Weight (kg/km) | Max Fibers per Tube | Max No. ta (Tubes+fillers) | Allowable Tensile Load (N) | Allowable Crush Reżistenza (N/100mm) | ||
Short Term | Long Term | Short Term | Long Term | |||||
2~30 | 12.2 | 142 | 6 | 5 | 3000 | 1000 | 3000 | 1000 |
32~48 | 12.8 | 155 | 8 | 6 | 3000 | 1000 | 3000 | 1000 |
50~72 | 13.6 | 170 | 12 | 6 | 3000 | 1000 | 3000 | 1000 |
74~96 | 15.0 | 192 | 12 | 8 | 3000 | 1000 | 3000 | 1000 |
98~144 | 16.6 | 220 | 12 | 12 | 3000 | 1000 | 3000 | 1000 |
>144 | Available upon customer’s request | |||||||
Feature
- High-quality optical fiber provides good transmission performance
- Accurate fiber excess length control ensures excellent mechanical and temperature performance
- Special filling gel filled loose tubes provide perfect optical fiber protection
- All section water blocking provides reliable performance of moisture-proof and water block
- Corrosion resistance phosphate steel wire with high Young’s modulus as central strength member gives high tensile strength
- Longitudinal corrugated steel tape presents desirable crush resistance
- Strict craft and raw material control enable a lifespan of over 30 snin
Applikazzjoni ta 'GYTY53 Cable ottiku
- Struttura ta 'kisja doppja, prestazzjoni eċċellenti ta 'reżistenza għat-tgħaffiġ.
- It can effectively prevent the damage to rodents.
GYXTW Single Mode 12 Core Armored Optic Cable
GYXTW Armored Uni Tube Single Jacket/Single Armored cable is designed with the flexibility and versatility required for today’s most demanding installations, including direct buried. The metallic armor is used when mechanical protection is desired.
Karatteristiċi:
- Uni-tube gel-filled construction for superior fiber protection.
- Metallic armor to protect cable from rodent attack and mechanical damage.
- Embedded steel wire provide desirable tensile strength and crush resistance.
- Compact, easy to install.
- UV and waterproof design.
Cable type | Underground outdoor GYFTY53 fiber optic cable |
Material of jacket | PVC, LSZH, PE, PU, TPU, ect. |
Operating temperature | -40deg℃to + 70deg℃ |
Fiber type | G652/G655/62.5/50/OM3 |
Kulur | Iswed |
Fiber core | 2-288qlub |
Raġġ tal-liwi | Static 12.5*Cable-diameter: Dynamic 25*Cable-diameter |
Tube | Loose tube stranded/SZ stranded |
Cable pack | Wooden Drum |
Fiber | 2-24 fibra |
Strength Member: | Steel Wire |
Armor | Corrugated steel tape |
Outer Jacket | Black UV Polyethylene(PE) |
Cable model | Number of fibers | Cable diameter mm | Cable weight kg/km | Allowable stretching force Long/short term N | Allowable crushing force Long/short term N/100mm | Bending radius Static/dynamic mm |
GYXTW-2~12 | 2~12 | 10.6 | 124 | 1000/3000 | 1000/3000 | 10D/20D |
GYXTW-14~24 | 14~24 | 12.5 | 149 | 1000/3000 | 1000/3000 | 10D/20D |
GYXTW-26~36 | 26~36 | 14.0 | 190 | 1000/3000 | 1000/3000 | 10D/20D |
GYXTW-38~48 | 38~48 | 15.0 | 216 | 1000/3000 | 1000/3000 | 10D/20D |
Return Loss | dB | ≥55 | ≥50 | ≥60 | ≥35dB | ≥35dB |
Insert-pull Test | dB | ≤0.2 | ≤0.2 | ≤0.3 | ≤0.15 | ≤0.15 |
Interchangeability | dB | ≤0.1 | ≤0.1 | ≤0.15 | ≤0.1 | ≤0.1 |
Firxa tat-Temperatura | ℃ | -40~+80 | ||||
Durability(1/Matings) | ≥1000 | |||||
Tensile Strength (N) | ≥90 (Φ3.0), ≥70 (Φ2.0), Φ0.9 | |||||
Fiber | 9/125um, 50/125um,62.5/125um,ect | |||||
Diameter | 0.9mm 2.0mm, 3.0mm etc | |||||
Cores | Simplex, duplex, 4qlub, 6qlub, 8qlub, 12cores etc | |||||
Applikazzjoni:
- Interbuilding voice or data communication.
- Installed in duct, underground conduit.
- FTTx.
Features of VERI Direct Burial Fiber Cable
- Waterproof Layer Design for Direct Buried Fiber Optic Cables
Direct burial fiber optic cables manufactured by VERI Cables are usually designed to achieve waterproof performance through multiple layers of protection, inklużi waterproof coatings, moisture and water barrier tapes, aluminum foil shielding, and double jacket construction, among other measures. The excellent waterproof performance makes the cable more durable and stable environmental adaptability.
Mudell | Waterproofing Technology | Applikazzjoni | Material Structure |
G652D | Waterproof Coating + Water Resistant Tape | General underground communications network | HDPE sheath |
G657A1/A2 | Waterproof Paste + Aluminum Foil Shield | Wet environments, complex wiring areas | Double PE sheath |
Armored Fiber Optic Cable | Moisture barrier + Armor layer | Scenarios with high water table and high mechanical pressure | Waterproof adhesive padding + outer jacket protection |
Special moisture-proof material | Laying of communications under high-voltage transmission lines | Waterproof Grease + Aluminum Sheathing |
- Design Features for Flame Retardant Fiber Optic Cables
VERI Cables produces fiber optic cables with flame retardant properties that are designed with the following structures: low smoke halogen free jacket materials, flame retardant additives, multi-layer jacket structures, armor layer protection, eċċ. Suitable for underground public facilities, petrochemical sites, data centers, new energy facilities.
Mudell | Flame retardant Standards | Material Characteristics | Applikazzjoni |
G657A1 LSZH | IEC 60332-1/3 | Low smoke halogen free jacket, high temperature resistant | Urban communications, underground pipelaying |
G652D Armored Fiber Cable | UL 94 V-0 | Double Armor + Low Smoke Flame Retardant Jacket | High-risk areas such as tunnels and subways |
Fire-Resistant OPGW | EN 50266 | Special fire retardant coating | High voltage grid transmission lines |
Is-Servizzi Professjonali tagħna
Ċertifikazzjoni tal-Kwalità
Il-prodotti manifatturati minn VERI Cables jikkonformaw ma 'standards internazzjonali bħal GB, IEC, BS, NFC, ASTM, MINN, eċċ. Barra minn hekk, it-tim tekniku tagħna jista 'jipprovdi servizzi ta' customization tal-kejbil għall-bżonnijiet tiegħek.
Traċċar tal-Klijent
VERI jipprovdi servizzi ta' konsulenza professjonali b'xejn tal-kejbil, servizzi ta 'soluzzjoni ta' proġett one-stop, u soluzzjonijiet veloċi ta 'kunsinna tal-prodott.
Trasport Professjonali
Kejbils VERI’ għan inizjali huwa li jiġi żgurat kunsinna veloċi u sigura tal-prodotti filwaqt li tipprovdi wkoll l-aħjar soluzzjonijiet ta 'ppakkjar u trasport biex jitnaqqsu l-klijenti’ spejjeż tat-trasport ħafna.
Ippakkjar tal-Cable
L-ippakkjar tal-kejbil VERI huwa fornut f'rukkelli tal-injam, kaxxi korrugati, u coils. It-truf huma ssiġillati b'tejp li jwaħħal waħdu BOPP u tappijiet tas-siġillar mhux igroskopiċi biex jipproteġu t-truf tal-kejbil mill-umdità. Nistgħu nipprintjaw il-logo meħtieġ fuq barra tat-tnabar b'materjal li ma jgħaddix ilma minnu skond il-ħtieġa tal-klijent.
