Flexible Control Cable
Veri Cable has more than thirty years of experience in manufacturing flexible control cables. We can offer a lot of control cables for you. Including shielded flexible control cable, unshielded flexible control cable, instrument cable. Shielded control cables with one or more insulated conductors. Usually, it has a common conductive layer. Braided strands of copper、aluminum or another metal shielding for shielding control wires. It could also be a non-woven helical wrap of copper tape or a layer of conductive polymer.
Meanwhile, we promise the quality. Whatever you want about cable products, we can satisfy you! Please feel free to contact us at once.
Types of VERI Flexible Control Cable
KVV KVVR KVVRP Flexible Multicore Control Cable
The use of shielded control cables in security systems provides some protection against power frequency and radio frequency interference. Shielded drain wires can reduce the number of false alarms generated. It can be widely used in areas where heavy equipment is located, such as production or factory floors.
Laying indoors, cable trench, pipeline and other fixed places. Signaling control, monitoring and protection circuit lines, electrical instruments, power distribution unit, controlling the use and measurement. (Such as measurement test, signal display, self-test telemetry, computer networking, alarm and other signal transmission control systems).
KVV(KVVP): Complies with GB/T3956 Type 1 and Type 2 Stranded Conductor
KVVR: Complies with GB/T3956 No. 5 stranded conductor
KVV: PVC/A type PVC insulation of rigid structure cable for fixed laying
KVVP: Hard structure cable PVC/A type PVC insulation for fixed laying
KVVR: PVC/D type polyvinyl chloride insulation for flexible structure cables in mobile occasions
Allows to fill the gap between the core wires, optional, and the cable is wrapped with an isolation layer (PP tape or non-woven wrap is optional)
KVV(KVVP): hard structure PVC sheathed cable for fixed laying, PVC/ST1 polyvinyl chloride.
KVVR: PVC/ST5 polyvinyl chloride sheath
KVVP: braided round copper wire or tinned round copper wire
Insulation thickness ≤ 0.6mm: 2000V,
Insulation thickness ≥ 0.6mm: 2500V
External test: 3000V
Minimum bending radius
Fixed installation: 6×D (outer diameter of cable)
Mobile installation: 12×D (outer diameter of cable)
Fixed laying: 12xD (outer diameter of cable)
Mobile installation: 6XD (outer diameter of the cable)
Fixed laying: 12×D (outer diameter of cable)
Fixed laying: -10℃ to +70℃
Mobile installation: -5°C to +70°C
Radiation resistance 8×107cJ/kg
300V 500V Flexible Unshielded Control Cables
The unshielded flexible control cable can work well under mild mechanical stress and is suitable for most environments. It is a general-purpose cable. These unshielded flexible control cables are twisted by ordinary electrolytic thin copper wires with PVC insulation. These unshielded control cables are flexible enough to be installed outdoors as well as indoors in dry or wet conditions such as engineering, factory installation, automotive production, and bottling plants.
It is often used in mobile equipment units, where it is necessary to cycle, to prevent cable entanglement, wear, pull, hook, and scatter, we often put the cable into the drag chain or put it into the hose to protect the cable, and the cable It can also be moved back and forth with the drag chain or hose.
Temperature range (Occasional flexing)
-15℃ to +70℃
Temperature range(In drag chains)
-5℃ to + 70℃
Temperature range(Fixed installation)
-40℃ to +80℃
Oil resistant/Torsion-resistant/Chemical resistance
Transportation with Professional Service
Veri Cable has multiple ways to protect your cables, with sturdy and professional shipping packaging and comprehensive insurance. Before shipping, our cables are packaged in wooden reels and corrugated box coils. During transportation, to protect the cable ends from moisture, we seal them with BOPP self-adhesive tape and non-hygroscopic.
If there are quality problems such as damaged packaging and product surface damage on the spot when the goods are received, if the goods are confirmed to be true, the goods do not match the order, and the quality problems found by the customer during the installation, laying and use process are confirmed to be the quality problems of the product itself, If the delivery is not in accordance with the contract requirements, please contact our company directly.