ARMORED ELECTRIC CABLE
Armored cable does not have a specific model number, it refers to a large category in the classification of cables, VERI cable can be customized according to the customer to provide a variety of parameters and specifications for the appropriate armored cable products. VERI armored power cables are suitable for transmitting and distributing power in transmission and distribution systems from 0.6kv~35kv or lower voltages. It also prevents rodents from chewing through the armor which can cause power transmission problems. In addition to the above purposes, the addition of an armor layer to the cable enhances the mechanical protection properties such as tensile and compressive strength, and extends the service life.
Armored Cable Types and Sizes
Flexible Copper Oil Resistant PVC Armored Control Cable
The control cable can be produced according to the standard GB9330-1988, IEC, OD, and BS, and the factory can also manufacture the cables by other standards.
Rated voltage: 450/750V
Conductor: Copper wire /tinned-copper wire, Class1, Class2, Class5
Insulation: PVC /PE /XLPE
Cabling: multicore stranded
Shield(if required): Copper tape or CWS or Al-plastic tape with drain wire
Inner sheath (applicable if there is an armor layer): PVC/PE
Armour layer: Galvanized steel wire / Steel tape
Outer sheath: PVC/PE/LSHF
Other characteristics: Oil resistant, Flame retardant, Anti-corrosion, UV, itd.
Product Parameter Specification
Type | Name | Section Area(mm2) | No. of Core | Application Site |
KVV | Copper Conductor,PVC Insulated and Sheathed Control Cable | 0.75 1.0 1.5 2.5 | 2-16 | Permanent installation indoors,in cable ditches or pipes |
4 6 | 2-14 | |||
10 | 2-10 | |||
KVVP | Copper Conductor,PVC Insulated and Sheathed,Braiding Shielded Control Cable | 0.75 1.0 1.5 2.5 | 2-61 | Permanent installation indoors,in cable ditches or pipes where shielding is required |
4 6 | 2-14 | |||
10 | 2-10 | |||
KVVP2 | Copper Conductor,PVC Insulated and Sheathed,Copper-tape Screened Control Cable | 0.75 1.0 1.5 2.5 | 4-10 | Permanent installation indoors,in cable ditches or pipes where shielding is required |
4 6 | 7-61 | |||
10 | 4-10 | |||
KVV22 | Copper Conductor, PVC Insulated and Sheathed, Steel tape Armored Control Cable | 0.75 1.0 1.5 2.5 | 7-61 | Permanent installation indoors,in cable ditches,Be able to withstand stronger external mechanical force |
Application
Control Cable is suitable for the connection of control equipment and monitor instruments and is also used as power and connecting cables in mechanical engineering for tooling machinery, control units, production lines, transportation equipment, conveyor and assembly lines as well as in plant construction under the circumstance that the rated voltage is up to 450/750V AC.
Stainless Steel Tube Flexible Armored Fiber Optic Cable
VERI Armored Fiber Optic Cables can be divided into indoor armored fiber optic cables and outdoor armored fiber optic cables according to the application of fiber optic cables. Poleg tega, armored fiber optic cable can also be divided into interlocking armored fiber optic cable and corrugated armored fiber optic cable according to the different types of metal armor. Indoor armored fiber optic cable: indoor armored fiber optic cable includes single-layer armored and double-layer armored fiber optic cable.
Fiber Type: G.652D, G.657A1 or G.657A2 single mode fiber and OM1, OM2, OM3, OM4 mutimode fiber.
Application:
1. Applied to the patch cord of the optical terminal.
2. Indoor outdoor for FTTH and optical distribution, connection between optical cable and communication equipment room.
MC Armored 12/2 Flexible Metal Clad Cable
VERI Type MC Armored Cable can be used for feeder and branch circuit lines as specified in NEC. The insulation wire core of type MC cable is XHHW-2, it can be used in dry and wet locations with the highest working temperature not exceeding 90. The rated voltage of type MC cable is 600V. The cable consists of three or four XLPE insulated phase cores plus one bare ground conductor. Interlocked aluminum armor tape is applied over all the cables. A PVC jacket is optional. MC cable with PVC jacket provides extra durability. long-term reliability and installation security.
Conductor: AA-8030 aluminum alloy conductors
Insulation: Cross-linked polyethylene(XLPE) izolacija
Armor: Interlock aluminum tape armor
Temperature Range: Temperature of 90 C in wet and dry locations
Environmental: Free of harmful heavy metals in compliance with RoHS
Nazivna napetost:600Volt
Cable Data Sheet:
Conductor Size( AWG,Kcmil) | Nominal insulation Thickness | Nominal Overall Diameter | Approx.Weight |
inch | miles | lbs/1000ft | |
6-6-6-6 | 45 | 819 | 283 |
4-4-4-6 | 45 | 906 | 350 |
2-2-2-6 | 45 | 1016 | 446 |
Standard: ASTM-B,B-801 and B-836, UL standard 44 for XHHW-2, UL Standard 1569, RoHS environmental conductive requirement
Specifications:
The AA-8000 aluminum alloy conductor is applied in Type MC cable.
Its insulated core complies with the requirement of Type XHHW-2 in UL44.
Insulation material is cross-linked polyethylene(XLPE) with characteristics property, which can meet the FT2 level combustion test requirement.
MC cable, USA, UL & NEC standard, armored cable, metal-clad cable, AC cable, BX cable, TECK cable, interlocked armored cable.
About VERI Cable After-Sales Service
First, Product Quality Commitment:
- There are quality records and testing data for the manufacture and testing of all cable products.
- For the inspection of product performance, we sincerely invite users to inspect the whole process and performance of the product in person. After the product is confirmed to be qualified, it will be packaged and shipped.
Second, the product price commitment:
- In order to ensure the high reliability of the product, the material selection of the system is made of domestic or high-quality products.
- Under the same competitive conditions, our company will sincerely provide you at an affordable price without reducing the technical performance of the product or changing the product components.
- Delivery time commitment:
Third, Product delivery time:
As far as possible according to user requirements, if there are special requirements that need to be completed in advance, our company can specially organize production and installation, and strive to meet user needs.
Fourth, after-sales service commitment:
- Service tenet: fast, decisive, accurate, thoughtful and thorough.
- Service objectives: service quality to win customer satisfaction.
- Service efficiency: If the equipment fails within the warranty period or outside the warranty period, after the supplier is notified, the maintenance personnel can reach the site and start maintenance within 24 ure.
- Service principle: The warranty period of cable products is twelve months. During the warranty period, the supplier will repair and replace the parts damaged due to quality reasons for free. If the parts are damaged outside the warranty period, the provided accessories will only charge the cost the cost of equipment damage caused by human factors of the buyer, and the accessories repaired or provided by the supplier are calculated at cost.
